topcoat
Albertono Road Marking Paint
ALBERTONO ROAD MARKING PAINT :
Product Uses :
Suitable for direct application to all types of new or previously painted bituminous and concrete road surfaces.
Features and Benefits :
• Reduces the need for coning and offers more line length per working day.
• Formulated for use on bitumen and concrete road surfaces and offers excellent road service.
• Formulated in accordance with SABS 731-1: 2006, and conforms to Types 1, 2 and 4.
• Excellent day and night visibility.
• Good retro reflectivity due to excellent glass bead retention.
• Can be applied by brush, roller or road striping machine.
• Produces a surface with anti-skid properties.
• White and Yellow has no added lead.Bergermaster Contractors Acrylic PVA
BERGERMASTER CONTRACTORS ACRYLIC PVA :
Product Uses :
Recommended where a matt finish is required to hide minor imperfections.
Product Benefits :
• Dries to an attractive matt finish.
• Easy application by brush or roller.
• Excellent over-coating properties.
• Good alkali resistance.
• Good interior washability.
Drying Time = Touch Dry 30 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 10m² per litreBergermaster Contractors Gloss Enamel
BERGERMASTER CONTRACTORS GLOSS ENAMEL :
Product Uses :
Suitable for use on all interior and exterior trim or walls, providing excellent durability
Features and Benefits :
• One product convenience for interior/exterior use.
• High gloss finish.
• Easy to keep clean - low dirt retention.
• Easy to apply and smooth appearance.
• Excellent durability - tough and hardwearing.
Drying Time = Surface Dry 4 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 10m² per litreBergermaster Craftsmen Nukote PVA
BERGERMASTER CRAFTSMEN NUKOTE PVA :
Product Uses :
Primarily used on new plastered walls where a quick drying matt finish is required. May also be used as a low cost finish for interior ceiling boards.
Features and Benefits :
• Low cost PVA, specifically formulated for contractors requirements.
• Quick drying time.
• Good obliteration and over-coating properties.
Drying Time = Touch Dry 30 minutes
Recoating Time = 3 hours
Spreading Rate Approx. = 8m² per litreDucoSpray
DUCOSPRAY :
Product Uses :
Particularly recommended for objects which are difficult to paint by brush e.g. baskets, toys and wherever a professional finish is required.
Features and Benefits :
• World famous Duco packed in aerosol form.
• Rapid dry - second coats can be applied after 30 minutes.
• Excellent durability and superb appearance.
• Extremely easy to use.
Drying Time = Surface Dry ¼ - ½ hour
Recoating Time = ½ hourDulux Acrylic PVA
DULUX ACRYLIC PVA :
Product Uses :
Recommended for exterior and interior walls and ceilings. May also be applied to metal and wooden surfaces provided these surfaces have been primed with an appropriate primer.
Features and Benefits :
• Exceptional scrubbability.
• Enhanced stain resistance.
• Exceptional coverage and whiteness.
• Low odour.
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 8 to 10m² per litreDulux Aluminium Paint
DULUX ALUMINIUM PAINT :
Product Uses :
For all interior and exterior primed metal and wooden surfaces. Can withstand up to 100°C. Excellent as a roof paint where its ability to reflect heat considerably reduces the inside temperature of houses and buildings.
Product Benefits :
• Excellent durability.
• Improves illumination.
• Reflects heat.
Drying Time = Surface Dry 8 hours
Recoating Time = 18 hours overnight
Spreading Rate Approx. = 10 to 12m² per litreDulux Bathroom+
DULUX BATHROOM+ :
Product Uses :
Suitable for interiors that suffer from high condensation. Not suitable for areas that are continually soaked with water, e.g. shower enclosures.
Features and Benefits :
• Attractive soft sheen finish for high condensation areas.
• Moisture and steam resistant - ideal for high condensation areas.
• Mould resistant - Mouldec technology.
• Exceptionally durable and washable.
• Preserved air quality - low VOC, less than 16g/L.
Drying Time = Touch Dry 45 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 10m² per litreDulux Brick Dressing
DULUX BRICK DRESSING :
Product Uses :
Also suitable for previously varnished brick and stone, provided the surface is sound. Not recommended as a floor finish, or as sealer for slate, vinyl and ceramic tiles.
Features and Benefits :
• A clear glossy tough sealer.
• Accentuates brick and stonework.
• Strengthens and seals in one operation.
• UV stabilsed.
Drying Time = Surface Dry 4 hours
Recoating Time = 18 hours overnight
Spreading Rate Approx. = 10m² per litreDulux Colours of the World
DULUX COLOURS OF THE WORLD :
Product Uses :
Colours of the World™ is an interior, low sheen and low odour washable paint for walls.
Features and Benefits :
• Very good cleanability and wear resistance.
• Very good coverage.
• Low odour.
• Superb appearance with an even low sheen finish.
Drying Time = Touch Dry 60 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 8 to 10m² per litreDulux Eggshell Enamel
DULUX EGGSHELL ENAMEL
Product Uses :
Highly recommended for plaster, metal and woodwork. Appropriate primers and undercoats must always be used, particularly on new work. Ideal for interior trims, interior furniture, kitchens and bathrooms.
Features and Benefits :
• Exceptionally tough finish.
• Scratch resistant.
• Stain resistant.
• Superb appearance with an even eggshell finish.
Drying Time = Surface Dry 4 hours
Recoating Time = 18 hours overnight
Spreading Rate Approx. = 8 to 10m² per litreDulux Gloss Enamel
DULUX GLOSS ENAMEL :
Product Uses :
Highly recommended for plaster, metal and woodwork. Appropriate primers and undercoats must always be used, particularly on new work.
Features and Benefits :
• Extremely durable.
• Colour fade resistant – protection against harsh UV rays.
• Scratch and stain resistant.
• Superb appearance with even gloss finish.
Drying Time = Surface Dry 4 hours
Recoating Time = 18 hours (overnight)
Spreading Rate Approx. = 8 to 10m² per litreDulux Luxurious Silk
DULUX LUXURIOUS SILK :
Product Uses :
Recommended for all interior walls that require a long-lasting washable and scrub-resistant finish.
Features and Benefits :
• Supreme stain resistance.
• Excellent cleanability and wear resistance.
• Superior coverage.
• Low odour – rapid room re-entry.
• Superb appearance with even silky finish.
• Washable (complies with Class 1 of the SABS standard for scrub resistance - SANS 6258:200x Edition 2).
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 8 to 10m² per litreDulux Magic White
DULUX MAGIC WHITE :
Products Uses :
Perfect for painting white over white to ensure that one never misses a spot. Time saving, no need to come back to touch up missed spots after the job is finished.
Features and Benefits :
• No more ‘missed’ areas, goes on pink, changes to white in under an hour.
• Convenient, quick, effective and ideal ceilings.
• Hides Minor Surface Imperfections.
• One coat cover over white and pastel colours.
• Washable.
• Preserved air quality - Low VOC less than 16 g/L.
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 7 to 9m² per litreDulux Pearlglo Water Based
DULUX PEARLGLO WATER BASED :
Product Uses :
Suitable for direct application to new or previously painted plaster, fibrecement or concrete surfaces. Also suitable for application to metal and wooden surfaces provided they
have been suitably primed. Recommended for all interior walls and ceilings especially where a superior low dirt pick-up finish is required. Ideal for cupboards, doors, frames, skirting, and furniture.
Features and Benefits :
• Tough water-based satin enamel.
• Resistant to household grime and blocks stains.
• Knock and chip resistant.
• Fast drying and low odour – rapid room re-entry.
• Non Yellowing.
• Superior exterior durability.
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 8 to 10m² per litreDulux Rainshield
DULUX RAINSHIELD :
Product Uses :
Ideal for water proofing of parapets and tops of freestanding walls, nail heads, cracked tiles and fibre cement roofs, cement or concrete walls, roof features and flower pots.
Features and Benefits :
• One step membrane free application.
• Fibre reinforced - bridges cracks of up to 2mm without the need for a waterproofing membrane.
• Water resistant.
• Flexible and crack resistant.
• Long lasting acrylic formulation.
• Can be top coated with most water based paints.
Drying Time = Touch Dry 2 hours
Recoating Time = 4 hours
Spreading Rate Approx. = 2 to 3m² per litreDulux Rich Matt
DULUX RICH MATT :
Product Uses :
For all interior walls that require a luxurious, long-lasting washable matt finish. Suitable for application to new or previously painted plaster and fibre cement. Also suitable for application to metal and wooden surfaces provided that
these surfaces have been suitably primed.
Features and Benefits :
• Supreme Stain Resistance.
• Hides plaster imperfections.
• Low odour – rapid room re-entry.
• Wipes clean without shiny patches.
• Superior coverage.
• Washable (complies with Class 1 of the SABS standard for scrub resistance - SANS 6258:200x Edition 2).
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 8 to 10m² per litreDulux Roofguard
DULUX ROOFGUARD :
Product Uses :
Dulux Roofguard is for application to new galvanised iron, fibre cement and cement tiles. Although essentially a roof paint, it also has other applications such as side cladding, galvanised iron garage doors, gutters and downpipes, garden pots, and suitably prepared Chromadeck surfaces.
Features and Benefits :
• High quality pure acrylic finish.
• Solarflex – Colour Fade and UV resistant.
• Superior Adhesion.
• Sheds Dirt.
• Excellent water resistance.
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 8m² per litreDulux Trade 100 Lowsheen
DULUX TRADE 100 LOWSHEEN :
Product Uses :
All purpose wall and ceiling finish for interior and exterior use on cement plaster, fibre cement, concrete, brickwork and various types of composition boarding. Also suitable for application to metal and wooden surfaces, provided
those surfaces are suitably primed before the application of
this material.
Features and Benefits :
• Good exterior durability.
• Low sheen finish resists dirt pick-up.
• Water based - two topcoats can be applied during the same day.
• Hard wearing and easy to apply.
• Excellent interior washability.
Drying Time = Touch Dry 30minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 10m² per litreDulux Trade 100 Matt
DULUX TRADE 100 MATT :
Product Uses :
Suitable for application to new or previously painted plaster and fibre cement. Also suitable for application to metal and wooden surfaces provided that these surfaces have been suitably primed. Recommended for interior and exterior areas that require a luxurious, long-lasting washable matt finish. (For kitchens and bathrooms, an ALKYD ENAMEL is recommended.)
Features and Benefits :
• A premium quality coating with an attractive matt finish.
• Matt finish does not show up minor plaster inperfections.
• Provides excellent stain resistance and washability.
• Quick drying - two topcoats can be applied during the same day.
• Low odour formulation allows rapid room entry.
• No hassles with cleaning up - wash equipment with tap water.
• Non-yellowing - white and colours will not yellow with age.
• Water based - easy clean up.
Drying Time = Touch Dry 30 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 10m² per litreDulux Trade 50 Matt
DULUX TRADE 50 MATT :
Product Uses :
Suitable for use on new cement plasterm concrete and various types of composition boarding.
Features and Benefits :
• Suitable for interior and exterior use.
• Low odour - can be used in odour sensitive areas.
• Quick drying - two topcoats can be applied during the same day - thus time and labour saving.
• Easy to apply.
• Economical matt finish with high opacity.
Drying Time = Touch Dry 30 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 8m² per litreDulux Trade 65 Matt PVA
DULUX TRADE 65 MATT PVA :
Product Uses :
Suitable for application to a variety of building surfaces which include new cement plaster, concrete, gypsum plaster and various types of composition boarding.
Product Benefits :
• Good exterior durability.
• High opacity - obliteration is normally achieved in one coat.
• Easy to apply.
• Good alkali resistance - can be used on new plaster.
• Easy water clean-up.
Drying Time = Touch Dry 30 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 8m² per litreDulux Trade 70 Midsheen
DULUX TRADE 70 MIDSHEEN :
Product Uses :
All purpose wall and ceiling finish for application to interior and exterior cement plaster, fibre cement, concrete, brickwork and various types of composition boarding.
Also suitable for application to metal and wooden surfaces, provided those surfaces are suitably primed before the application of this material. An economical washable coating with low dirt pick-up.
Features and Benefits :
• Good exterior durability and good interior washability.
• Mid sheen finish for interior and exterior use.
• Quick drying - two topcoats can be applied during the same day.
• Low odour - can be used in odour sensitive areas.
• Hard wearing and easy to apply.
• Good interior washability.
Drying Time = Touch Dry 30 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 10m² per litreDulux Trade Bituminous Aluminium Paint
DULUX TRADE BITUMINOUS ALUMINIUM PAINT :
Product Uses :
May be applied directly to bituminous surfaces, “malthoid” roofs and creosoted timber without priming. Excellent as a roof paint where its ability to reflect heat can reduce the inside temperature of houses and buildings.
Features and Benefits :
• High lustre bituminous aluminium paint.
• Good water resistance.
• Free from bleeding on bituminous surfaces.
• Improves illumination.
• Reflects heat.
Drying Time = Surface Dry 8 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 8 to 10m² per litreDulux Trade Ecosure Matt
DULUX TRADE ECOSURE MATT :
Product Uses :
Formulated specifically for interior use, but may be used outdoors. Suitable for application to a variety of building surfaces which include new cement plaster, concrete, gypsum plaster and various types of composition boarding.
Features and Benefits :
• Good exterior durability.
• High opacity - obliteration normally achieved in one coat.
• Easy to apply.
• Easy water clean-up.
Drying Time = Touch Dry 30 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 8m² per litreDulux Trade Ecosure Silk
DULUX TRADE ECOSURE SILK :
Product Uses :
All purpose wall and ceiling finish for application to interior and exterior cement plaster, fibre cement, concrete, brickwork and various types of composition boarding.
Also suitable for application to metal and wooden surfaces, provided those surfaces are suitably primed before the application of this material.
Features and Benefits :
• Lower Carbon and lower VOC content that conventional
equivalent products.
• Hard wearing and good exterior durability.
• Easy to apply and quick drying - two topcoats can be applied during the same day.
• Reduced environmental impact.
• Low dirt pick-up due to smooth mid-sheen finish.
Drying Time = Touch Dry 30 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 10m² per litreDulux Trade Eggshell Enamel
DULUX TRADE EGGSHELL ENAMEL :
Product Uses :
Highly recommended for plaster, metal and woodwork. Appropriate primers and undercoats must always be used, particularly on new work. Ideal for kitchens and bathrooms.
Features and Benefits :
• Exceptionally tough finish.
• Scratch resistant.
• Stain resistant.
• Superb appearance with even eggshell finish.
Drying Time = Surface Dry 4 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 10m² per litreDulux Trade Floorcote Floor Enamel
DULUX TRADE FLOORCOTE FLOOR ENAMEL :
Product Uses :
For direct application to new, but dry cement or concrete floors. May be applied to previously painted or old cement surfaces, provided the surface is clean, sound and free from wax polish. Ideal for decorating interior and exterior windowsills, and has been successfully used on palisade fencing.
Features and Benefits :
• Glossy quick drying finish.
• Alkali resistant fast colours.
• Hard wearing and easy to clean.
• Easy to re-paint when recoating becomes necessary.
• Prevents disintegration of cement floors.
Drying Time = Surface Dry 4 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 10m² per litreDulux Trade Glazecoat
DULUX TRADE GLAZECOAT :
Product Uses :
Suitable for use over textured coatings such as DULUX TRADE SMOOTH RIPPLE. Can also be used as a protective coating over matt finishes, to prevent marring. Also recommended as a clear finish for brick and stone walls.
Features and Benefits :
• Clear and colourless, therefore the underlying colour of the substrate remains unaffected.
• 100% pure acrylic gives excellent adhesion, ensuring long lasting protection for paint system.
• Dries to a hard, glossy, non-yellowing finish which is easy to keep clean.
• Totally compatible with other DULUX TRADE water-based coatings.
• Good interior washability.
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 12m² per litreDulux Trade Gloss Enamel
DULUX TRADE GLOSS ENAMEL :
Product Uses :
Highly recommended for plaster, metal and woodwork. Appropriate primers and undercoats must always be used, particularly on new work.
Features and Benefits :
• Extremely durable and hardwearing.
• Colour fade resistant - protection against harsh UV rays.
• Scratch and stain resistant.
• Superb appearance with even gloss finish.
Drying Time = Surface Dry 4 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 10m² per litreDulux Trade Hi-Chem Epoxy Enamel
DULUX TRADE HI-CHEM EPOXY ENAMEL :
Product Uses :
Can be applied on walls, floors and suitably primed metal surfaces.
Features and Benefits :
• Good resistance to a wide range of chemicals and most solvents.
• Cures to a hard film with good adhesion and abrasion resistance.
• Provides an economical alternative to tiling in bathrooms, showers, kitchens, toilets and low cost housing.
• Suitable for surfaces that require frequent cleaning with solvents, detergents or alkaline cleaners.
• The cured film is non-toxic. When properly applied and cured, the product is completely safe for direct or accidental food contact, and can safely be used on children`s toys and on equipment and working spaces in the food and dairy industry.
Drying Time = Touch Dry 24 hours
Recoating Time = 6 hours
Spreading Rate Approx. = 9.3m² per litreDulux Trade Solvent Based Pearlglo
DULUX TRADE SOLVENT BASED PEARLGLO :
Product Uses :
Recommended for new or previously painted interior work such as doors, cupboards, windows, fascias and skirting boards. Pastel colours may also be applied to suitably prepared interior wall surfaces where an impervious, hard-wearing satin finish is desired, such as kitchens, bathrooms and children’s playrooms.
Features and Benefits :
• It is most convenient trim enamel paint ever formulated - no stirring, no mess, no stickiness, no runs.
• Can be used on most interior surfaces and dries to a smooth chip-resistant finish.
• Quick to apply - saves time and money when compared with conventional "sticky to apply" enamels.
• The product is highly recommended for the toughest jobs.
• Steam resistant.
• No undercoat needed.
Drying Time = Surface Dry 4 hours
Recoating Time = 18 hours overnight
Spreading Rate Approx. = 10m² per litreDulux Trade Smooth Ripple
DULUX TRADE SMOOTH RIPPLE :
Product Uses :
An interior/exterior wall coating with excellent obliteration properties. Useful for converting uneven concrete surfaces to an even, grit-free, smooth textured finish. Particularly suitable for wall areas where there is heavy traffic, e.g. corridors, alleys etc. Imparts a hardwearing abrasion resistant finish that can be over coated with Dulux Trade Glazecoat for higher gloss.
Features and Benefits :
• For interior and exterior use.
• High build, one coat cover.
• Water-based therefore low odour.
• Non-yellowing.
• Smooth silky finish.
• Smooth ripple finish without aggregate.
• Excellent interior washability.
Drying Time = Touch Dry 4 hours
Recoating Time = 18 hours if required
Spreading Rate Approx. = 2m² per litreDulux Trade Tuffcote Epoxy Enamel
DULUX TRADE TUFFCOTE EPOXY ENAMEL :
Product Uses :
Dulux Trade Tuffcote Waterbased Epoxy Enamel is a waterbased epoxy enamel for interior use in food and pharmaceutical industries (abattoirs, breweries, dairies, wine cellars) as well as for maintenance in other confined areas.
Features and Benefits :
• Environmentally friendly, water based, and equipment is cleaned with water.
• Almost odourless during application and curing.
• The substrate can be damp - concrete need not be fully cured before application.
• Non-specialist application - can be applied by the average "do-it-yourselfer".
• Resistant to fresh and salt water, oils and chemicals when fully cured - withstands continuous immersion up to 60°C.
• Withstands nuclear radiation and is easily decontaminated.
• Completely free of Mesityl Oxide, and is therefore approved for use in breweries.
• The cured film is non-toxic (contains no lead or other toxic chemicals).
• When properly applied and cured, the product is completely safe for direct or accidental food contact, and can safely be used on children`s toys and on equipment and working spaces in the food and dairy industry.
• Once fully cured (after 4 days), the product can withstand cold temperatures as low as -40°C.
Drying Time = Touch Dry 8 hours
Recoating Time = 24 hours
Spreading Rate Approx. = 9.3m² per litreDulux Trade Weathershield
DULUX TRADE WEATHERSHIELD :
Product Uses :
Suitable for cement plaster, gypsum plaster, concrete, fibre cement, previously painted surfaces, metal surfaces, wooden surfaces and bathroom and kitchen ceilings provided that the appropriate preparation is carried out.
Features and Benefits :
• Excellent exterior durability, flexibility and adhesion to cement based surfaces.
• Excellent alkali resistance and adhesion to cement
based surfaces.
• Outstanding water and dirt resistance.
• Inherent mould resistant properties (Mouldex) prevents the growth of fungus.
• Provides excellent stain resistance and washability.
Drying Time = Touch Dry 30 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 12 to 14m² per litreDulux Wallguard
DULUX WALLGUARD :
Product Uses :
The hydrophobic mechanism makes it ideal for all types of exterior walls – retaining and boundary walls in particular, where moisture levels do not exceed 25%. Suitable for application to new cement plaster, fibre cement, concrete, brickwork, and various types of composition boarding. Particularly recommended for fibre cement gutters and down pipes. On surfaces where the moisture levels are high ( But below 30%), Dulux Trade Plaster Primer Tolerant may be used as a Primer. May be applied to metal and wooden surfaces providing an appropriate primer has been used.
Features and Benefits :
• Durable dirt-shedding suede finish.
• Unique dual action hydrophobic mechanism – allows easy
moisture escape.
• Exceptional water repellence.
• Inherent mould resistance – patented Mouldex technology.
• Excellent coverage.
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 8 to 10m² per litreDulux Waterproofing
DULUX WATERPROOFING :
Product Uses :
An acrylic waterproofing paint developed to be used with a mesh membrane. This product can be used on flashing, roof joins, roof screws, parapets and chimney cappings. Dulux waterproofing is not suitable for areas of long term ponding.
Features and Benefits :
• Excellent adhesion.
• Water resistance.
• Flexible and durable.
• Can be applied with brush or roller.
Drying Time = Touch Dry 30 minutes
Recoating Time = 2 to 3 hours (depending on weather)
Spreading Rate Approx. = 2 to 3m² per litreDulux Weatherguard Fine Textured
DULUX WEATHERGUARD FINE TEXTURED :
Product Uses :
Ideal as a finishing coat for exterior raw or previously painted concrete, plaster or fibre cement surfaces. Particularly recommended for application to exterior plastered surfaces where hairline cracks are present. Recommended for exterior walls.
Features and Benefits :
• Fine textured finish.
• Unique texture hides plaster imperfections.
• Maxiflex - provides lasting elasticity against hairline cracks.
• Excellent weather resistance.
• Tough, durable and water-resistant.
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 4 to 6m² per litreDulux Weatherguard Ultrasmooth
DULUX WEATHERGUARD ULTRASMOOTH :
Product Uses :
Suitable for application to new exterior cement plaster, fibre cement, concrete, brickwork and various types of composition boarding. Particularly recommended for fibre cement gutters and down pipes. Suitable for application to previously painted surfaces which have been correctly prepared. May be applied to metal and wooden surfaces providing an appropriate primer has been used.
Features and Benefits :
• Attractive smooth coating.
• Protects against dirt.
• Excellent adhesion.
• Early weather resistance.
• Superior alkali resistance.
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 7 to 9m² per litreDulux Weatherguard Ultratex
DULUX WEATHERGUARD ULTRATEX :
Product Uses :
Particularly recommended for application to exterior plastered surfaces where cracks are present. Dulux Weatherguard Ultratex is capable of completely covering these cracks on ageing. (NB Ultratex covers cracks of up to 0.4 mm - hairline cracks are 0.2mm and below). The unique appearance makes it ideal for use on flats, townhouses
and homes. May be used on interior feature walls and ceilings for unusual decorative effects.
Features and Benefits :
• Coarse texture covers up plaster defects and cracks of up to 0.4 mm.
• Contains Maxiflex for superior flexibility.
• Resistant to extreme weather conditions.
• Unique texture allows the creation of decorative effects and feature walls.
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 2m² per litreDampshield
DAMPSHIELD :
Product Uses :
For interior and exterior where damp is a problem. May be applied on plaster and concrete.
Features and Benefits :
• Dampshield is water based and has a low VOC providing low odour and easy cleanup.
• Excellent adhesion to cementitious substrates.
• Quick drying - topcoat can be applied during the same day.
• Protects against peeling caused by damp.
• Prevents the effects of penetrating and rising damp.
Drying Time = Touch Dry 60 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 5m² per litreHammerite Hammered Metal
HAMMERITE HAMMERED METAL :
Description :
Hammerite paint is a single pack, air drying corrosion resistant and decorative coating. It is based on synthetic resins and is suitably pigmented for optimum weathering properties. Hammerite is fast drying and capable of multi-coat application any time after 4 hours. The specially selected resins impart a gloss or satin finish which resists dirt pick up. Hammerite has excellent wetting properties making it tolerant to poorly prepared ferrous surfaces.
Appearance = a smooth gloss incorporating a hammered pattern
Drying Time = Touch Dry 2 hour
Recoating Time = 4 hours
Recommended Film Thickness = 100 microns dry/200 microns wet
Spreading Rate Approx. = 5m² per litre at recommended dry film thicknessHammerite Smooth Metal
HAMMERITE SMOOTH METAL :
Description :
Hammerite paint is a single pack, air drying corrosion resistant and decorative coating. It is based on synthetic resins and is suitably pigmented for optimum weathering properties. Hammerite is fast drying and capable of multi-coat application any time after 4 hours. The specially selected resins impart a gloss or satin finish which resists dirt pick up. Hammerite has excellent wetting properties making it tolerant to poorly prepared ferrous surfaces.
Appearance = a smooth gloss
Drying Time = Touch Dry 2 hour
Recoating Time = 4 hours
Recommended Film Thickness = 100 microns dry/200 microns wet
Spreading Rate Approx. = 5m² per litre at recommended dry film thicknessRockgrip Acrylic Roof Coating
ROCKGRIP ACRYLIC ROOF COATING :
Product Uses :
Rockgrip Acrylic Roof is for application to suitably primed galvanised iron, fibre cement and cement tiles. Although a roof paint, it can also be applied to other areas such as side cladding, galvanised iron garage doors, gutters, downpipes and garden pots.
Features and Benefits :
• Good adhesion to roofs.
• Colours are resistant to rain and alkaline salts.
• Quick drying.
• Water clean up.
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 8m² per litreRockgrip Aluminium Paint
ROCKGRIP ALUMINIUM PAINT :
Product Uses :
For all interior and exterior primed metal and wooden surfaces. This includes roofs and hot surface areas below 100°C. Suitable for fences, roofs, down pipes and washing line poles.
Features and Benefits :
• General-purpose high lustre aluminium/silver finish.
• Excellent durability.
• Improves illumination.
• Reflects heat.
Drying Time = Surface Dry 6 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 10 to12m² per litreRockgrip Pliotex
ROCKGRIP PLIOTEX :
Product Uses :
Ideal as a finishing coat for exterior raw or previously painted concrete, plaster or fibre cement surfaces. Good exterior durability makes it ideal for use on high rise buildings, major building projects, flats, townhouses and homes. ROCKGRIP PLIOTEX is recommended for exterior surfaces.
Features and Benefits :
• Dries to a textured matt finish.
• Easy application by roller.
• Good water resistance properties.
• Easy water clean-up.
Drying Time = Touch Dry 1 hour
Recoating Time = 4 hours
Spreading Rate Approx. = 5 to 6m² per litreRockgrip Soft Velvet
ROCKGRIP UNIVERSAL PVA :
Product Uses :
All purpose wall and ceiling finish for application to interior and exterior cement plaster, fibre cement, concrete, brickwork and various types of composition boarding.
Also suitable for application to metal and wooden surfaces, provided those surfaces are suitably primed before the application of this material. Rockgrip Soft Velvet is an economical washable coating with low dirt pick-up.
Features and Benefits :
• Good exterior durability.
• Low sheen finish for interior and exterior use.
• Quick drying - two topcoats can be applied during the same day.
• Low odour - can be used in odour sensitive areas.
• Easy to apply.
• Hard wearing.
• Good interior washability.
Drying Time = Touch Dry 30 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 8 to 10m² per litreRockgrip Universal Gloss Enamel
ROCKGRIP UNIVERSAL GLOSS ENAMEL :
Product Uses :
Suitable for use on all interior and exterior walls and trim (frames and doors), providing new or previously painted surfaces have been suitably prepared.
Features and Benefits :
• One product convenience for interior/exterior use.
• High gloss finish.
• Easy to keep clean - low dirt retention.
• Easy to apply and smooth appearance.
• Excellent durability - tough and hardwearing.
Drying Time = Surface Dry 4 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 8m² per litreRockgrip Universal PVA
ROCKGRIP UNIVERSAL PVA :
Product Uses :
Suitable for use on new or previously painted interior walls and ceilings. Should be used where a matt finish is required to hide minor imperfections.
Features and Benefits :
• Attractive matt finish.
• Masks plastering imperfections.
• Recommended for roller application.
• Good alkali resistance.
• High opacity at a low cost.
• Easy water clean-up.
Drying Time = Touch Dry 30 minutes
Recoating Time = 4 hours
Spreading Rate Approx. = 8m² per litreWoodgard Exterior Double Life Timbavarnish
WOODGARD EXTERIOR DOUBLE LIFE TIMBAVARNISH :
Product Uses:
For application to all new interior wooden surfaces such as furniture, built-in cupboards, panelling, skirting boards and doors where a durable finish is required. Not suitable for wooden floors. May also be used over previously varnished interior surfaces, provided the surface is sound and not cracked or flaking.
Features and Benefits :
• Available in 3 levels of gloss - high gloss, eggshell and matt.
• Quick drying with low dirt pick-up.
• Extremely hard finish which resists heat from hot coffee cups, etc and household stains.
• Very easy to apply with good flow to give a professional finish.
• Excellent hold-out that gives uniformity of gloss, sheen or
mattness in depth.
Drying Time = Touch Dry 4 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 10m² per litreWoodgard Floorguard
WOODGARD FLOORGUARD :
Product Uses :
As a finish for all types of interior wooden flooring where a
hardwearing, slip resistant coating is required. Also recommended as an interior finish for wooden doors and panelling where a particularly scratch and mar resistant clear coat that is non-yellowing is required.
Features and Benefits :
• FLOORGARD dries to an extremely hard abrasion-
resistant finish, which resists scratch marks.
• A non-yellowing crystal clear sealer for wooden floors and interior wood work.
• A low odour varnish with excellent flow properties.
• FLOORGARD represents the practical way of finishing interior wooden floors and woodwork.
• It is a time and money saver. Easy to clean, makes polishing obsolete.
• Dries to a beautiful gloss finish - looks and feels like a waxed surface and highlights the natural grain.
• Seals wooden floors and woodwork.
Drying Time = Touch Dry 4 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 10m² per litreWoodgard Interior Double Life Timbavarnish (Eggshell)
WOODGARD INTERIOR DOUBLE LIFE TIMBAVARNISH
(EGGSHELL) :
Product Uses :
For application to all new interior wooden surfaces such as furniture, built-in cupboards, panelling, skirting boards and doors where a durable finish is required. Not suitable for wooden floors. May also be used over previously varnished interior surfaces, provided the surface is sound and not
cracked or flaking.
Features and Benefits :
• Available in three levels of gloss - high gloss, eggshell and matt.
• Quick drying with low dirt pick-up.
• Extremely hard finish which resists heat from hot coffee cups, etc and household stains.
• Very easy to apply with good flow to give a professional finish.
• Excellent hold-out that gives uniformity of gloss, sheen or mattness in depth.
Drying Time = Touch Dry 4 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 10m² per litreWoodgard Interior Double Life Timbavarnish (High Gloss)
WOODGARD INTERIOR DOUBLE LIFE TIMBAVARNISH
(HIGH GLOSS) :
Product Uses :
For application to all new interior wooden surfaces such as furniture, built-in cupboards, panelling, skirting boards and doors where a durable finish is required. Not suitable for wooden floors. May also be used over previously varnished interior surfaces, provided the surface is sound and not
cracked or flaking.
Features and Benefits :
• Available in three levels of gloss - high gloss, eggshell and matt.
• Quick drying with low dirt pick-up.
• Extremely hard finish which resists heat from hot coffee cups, etc and household stains.
• Very easy to apply with good flow to give a professional finish.
• Excellent hold-out that gives uniformity of gloss, sheen or mattness in depth.
Drying Time = Touch Dry 4 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 10m² per litreWoodgard Interior Double Life Timbavarnish (Matt)
WOODGARD INTERIOR DOUBLE LIFE TIMBAVARNISH
(MATT) :
Product Uses :
For application to all new interior wooden surfaces such as furniture, built-in cupboards, panelling, skirting boards and doors where a durable finish is required. Not suitable for wooden floors. May also be used over previously varnished interior surfaces, provided the surface is sound and not
cracked or flaking.
Features and Benefits :
• Available in three levels of gloss - high gloss, eggshell and matt.
• Quick drying with low dirt pick-up.
• Extremely hard finish which resists heat from hot coffee cups, etc and household stains.
• Very easy to apply with good flow to give a professional finish.
• Excellent hold-out that gives uniformity of gloss, sheen or mattness in depth.
Drying Time = Touch Dry 4 hours
Recoating Time = 18 hours
Spreading Rate Approx. = 10m² per litreWoodgard Interior/Exterior Timbavarnish
WOODGARD INTERIOR/EXTERIOR TIMBAVARNISH :
Features and Benefits :
• Durable wood protector for all iwood surfaces.
• Offers excellent long-term durability.
• Has superior flexibility compared to conventional varnishes.
• Resists cracking and peeling.
• Attractive gloss finish enhances the natural beauty of wood.
• Nourishes and protects against harmful UV rays.
• Quick drying.
• Contains special wood preservatives to protect against dry rot and fungus.
Drying Time = Touch Dry 4 hours
Recoating Time = 18 hoursWoodgard Interior/Exterior Timbavarnish (Water Based)
WOODGARD INTERIOR/EXTERIOR TIMBAVARNISH (WATER BASED) :
Features and Benefits :
• Durable wood protector for all wood surfaces.
• Offers excellent long-term durability.
• Has superior flexibility compared to conventional varnishes.
• Resists cracking and peeling.
• Attractive gloss finish enhances the natural beauty of wood.
• Nourishes and protects against harmful UV rays.
• Quick drying.
• Environmentally friendly.
• Solvent free - water clean-up.
• Contains special wood preservatives to protect against dry rot and fungus.
Drying Time = Touch Dry 4 hours
Recoating Time = 4 hours
Spreading Rate Approx. = 10 to 12m² per litreWoodgard Rubbol
WOODGARD RUBBOL :
Product Uses :
May be used on all exterior wooden surfaces such as windows, doors, barge boards, etc. where a durable water repellent dressing is required. Since WOODGARD RUBBOL is a penetrating type of dressing, previously varnished surfaces must be sanded back to bare (open grain) wood to allow the material to soak properly into the surface.
Features and Benefits :
• WOODGARD RUBBOL is not a varnish - it will not flake, crack or disintegrate on timber.
• It is based on proven international formulating experience which gives deep down protection to exterior wood.
• It is not a paint and will not obliterate the wood. WOODGARD RUBBOL enhances the natural beauty of wood, highlighting the grain.
• It is a maintenance coating. Once the first coat has worn through, or after 6 - 12 months, simply apply another coat. Saves time and money
• It is not sticky or difficult to apply. Flows on with a brush with little effort
• Water repellent.
Recoating Time = 48 hours
Spreading Rate Approx. = 10m² per litreWoodgard Timbapreservative
WOODGARD TIMBAPRESERVATIVE :
Product Uses :
A penetrating wood dressing for the protection of all new
exterior wooden surfaces such as windows, doors, barge boards, etc. where a durable water repellent dressing is required. Since WOODGARD TIMBAPRESERVATIVE is a penetrating type of dressing, previously varnished surfaces must be sanded back to bare (open grain) wood to allow the material to soak properly into the surface.
Features and Benefits :
• Woodgard Timbapreservative is not a varnish - it will not flake, crack or disintegrate on timber.
• It is based on proven international formulating experience, using a carefully selected blend of synthetic
resin, oil, wax and preservative, which gives deep down protection.
• It is not a paint and will not obliterate the wood. WOODGARD TIMBAPRESERVATIVE enhances the
natural beauty of wood, highlighting the grain.
• It is a maintenance coating. Once the first coat has worn through, or after 6 – 12 months, simply apply another coat. Saves time and money.
• Water repellent.
Drying Time = Requires several days to harden fully.
Recoating Time = 48 hours
Spreading Rate Approx. = 10m² per litreWoodguard Sanding Sealer
WOODGUARD SANDING SEALER
Product Benefits :
• Clear wood sealer.
• Fills grain and sands easily.
• Quick drying.
Drying Time = Touch Dry 3 hours
