sheet profile
Classicorr® Corrugated
• Classical Sinusoidal profile.
• Cover width = 762mm.
• Can be factory cranked to a curve and bullnosed to a wide range of radii.
ROOF PITCH :
• Minimum roof pitch is 10° provided the roof length from eaves to apex is less than 15 metres.
• For roof length from eaves to apex is over 15 metres a minimum roof pitch of 15° is recommended.Tufdek® IBR
• Angular trapezoidal fluted profile sheet.
• IBR = Inverted Box Rib.
• Cover width = 686mm.
• Can be factory cranked to a curve and bullnosed to a wide range of radii.
ROOF PITCH :
• Minimum roof pitch is 5° provided the roof length from eaves to apex is less than 15 metres.
• For roof lengths over 15 metres a minimum roof pitch of 7,5° is recommended.Fluteline®
• Trapezoidal profile sheet with excellent water-shedding capabilities.
• Cover width = 889mm.
• Can be factory cranked to a curve and bullnosed to a wide range of radii.
ROOF PITCH :
• Minimum roof pitch is 7,5° provided the roof slope is less than 15 metres.
• For roof slopes over 15 metres a minimum roof pitch of 10° is recommended.Widedek®
• Similar in appearance to IBR profiled sheeting but with approximately 10% more cover width.
• Cover width = 760mm.
• Can be factory cranked to a curve and bullnosed to a wide range of radii.
ROOF PITCH :
• Minimum roof pitch is 7,5° provided the roof length from eaves to apex is less than 15 metres.
• For roof length from eaves to apex is over 15 metres a minimum roof pitch of 10° is recommended.
ADVANTAGES :
• The advantage of using Widedek® in place of IBR profile is in the wider cover width.
• To achieve the same coverage less sheets are required to be erected, thus saving time and labour.Trimflute®
• Trimflute® is a subtle square fluted profile. The long flute gives the profile its strength with long spanning capabilities.
• Cover width = 1015mm
• Can be factory cranked to a curve and bullnosed to a wide range of radii.
ROOF PITCH :
• Minimum roof pitch is 7,5° provided the roof length from eaves to apex is less than 15 metres.
• For roof lengths 15 metres a minimum roof pitch of 10° is recommended.
ADVANTAGES :
• The advantage of using Trimflute® in place of IBR profile is in the covering due to its width.
• To achieve the same coverage less sheets are required to be erected, thus saving time and labour.
sheet material
ZINCAL®
ZINCAL® is a classic unpainted AZ coated steel.
• Considerable increase in service life (due to 4 times greater corrosion resistance)
• Superior thermal protection
• Lasting aesthetic valueCOLORPLUS®
Colorplus® is a factory pre-painted product, with colour applied over Zincal® substrate, offering all the advantages of Zincal® with the option of colour for added aesthestic appeal. The Colorplus® paint system has been carefully selected to endure the harsh African climate, to limit chalking and ensure optimal colour integrity. It also helps to resist dirt or contaminant retention, so that the surface stays clean and the colour is fresh looking for many years.
COLORPLUS® sheet colour
Chalk (COLORPLUS®)
Deep Ocean (COLORPLUS®)
Desert Sand (COLORPLUS®)
Rain Cloud (COLORPLUS®)
Rain Forest (COLORPLUS®)
Rustic Bark (COLORPLUS®)
Savannah (COLORPLUS®)
Seaspray (COLORPLUS®)
Slate (COLORPLUS®)
Sunset Red (COLORPLUS®)
Thunderstorm (COLORPLUS®)
Rain Cloud (COLORPLUS® Matt)
Seaspray (COLORPLUS® Matt)
Thunderstorm (COLORPLUS® Matt)
Rain Cloud (COLORPLUS® Textured)
Rustic Bark (COLORPLUS® Textured)
Thunderstorm (COLORPLUS® Textured)
(colour to be confirmed on finalisation)
Pierced fixed roofing and side cladding systems
