Liquid application
abe.® proof liquid membrane
abe.®proof liquid membrane is a single pack, solvent borne,
rubberised, liquid applied waterproofing membrane that is highly elastic and durable, requiring low maintenance.
abe.®proof liquid membrane can be used to waterproof most building substrates, typically this includes:
• Non-porous screeds, concrete, wood, polyurethane and
bituminous surfaces
• In addition it can be used for the refurbishment of existing,
new and old bitumen membranes without the removal
thereof
Advantages:
• Seamless, singular membrane
• Superior water resistance, stands up to water ponding
• High elasticity and durability offering good tensile strenght
• Excellent thermal stability
• Excellent adhesion to most prepared substrates
• Fast curing, second coat applied after 4 hours and full cure in 24 hours
• Moisture insensitive, can be applied in cool, warm and humid conditions
• No fabric reinforcement required for standard applications
• Quick turn-around time due to the simplicity of application
makes it economical
• Contains a minimum of 10% recycled productabeproof liquid membrane primer
abeproof liquid membrane primer is a single pack, solvent
borne, liquid primer applied to most building substrates.
abeproof liquid membrane primer can be used to prime most building substrates typically:
• Porous surfaces, deficient bituminous surfaces, wood as well as sound concrete and non-porous screeds
• A surface conditioner to obtain optimum performance from the products applied as top coats
Advantages:
• Excellent surface conditioner
• Easy to apply, fast curing, quick turn-around
• Moisture insensitive, can be applied in cool, warm and humid conditions
• Excellent adhesion to most prepared substratesbituprime
Bituminous priming and sealing solution.
bituseal® plastic
bituseal® plastic is a hydrocarbon solvent-borne, asbestos-free, reinforced bituminous mastic.
brixeal
brixeal is a bitumen emulsion waterproofer.
duraflex®
dura.®flex is a ready to use flexible slurry based on a special synthetic resin dispersion and a blend of selected cements mixed with carefully graded aggregate.
duraslurry
duraslurry is a ready-for-use (just add water) Portland
cement based waterproofing slurry. It consists of a blend of cements, graded quartz and active chemical constituents. It is supplied as a fine, grey powder.hydroproof®
Economical, water based acrylic waterproofer used with abe® membrane.
silvakote®
silvakote® is a one-pack, aluminium pigmented bitumen
solution.silvakote® eco
silvakote® eco is a liquid applied, high performance, highly elastomeric, solar reflective finishing coat modified with synthetic polymers. silvakote eco is both bitumen and solvent free.
super lacryl®
super laycryl® is a highly flexible liquid applied emulsion
reinforced with abe® membrane.super laykold®
super laykold® is a rubberised bitumen emulsion, which is
used together with abe® membrane to provide a liquid
waterproofing system. super laykold is koi fish friendly.wallseal
wallseal is a one-component siloxane waterproofing solution.
Torched-on membranes
abedex® AR
abedex AR is a rot and root resistant waterproofing membrane. The anti- root properties of the membrane are achieved by adding Polyglycol chloro-totyl-oxy-propionate additive, a specific anti-root agent, to the polymer bitumen mix.
abedex® AT
Excellent heat and abrasion resistance, hot asphalt tolerant
abedex AT offers increased elongation properties and is resistant to heat ageing, and puncture resistant. The compound is a mixture of distilled bitumen, plastomers and elastomers which give the membrane excellent durability and flexibility at low temperatures (-15 °C).abedex® FS-R
abedex F-SR membrane is manufactured from a compound of distilled bitumen elastoplastomeric and polymers. After mixing, the characteristics of the polymers are dominant and are evenly dispersed throughout the matrix. abedex F-SR membrane has excellent stability at both high and low temperatures and possesses good longevity
abedex® FS-R mineral slate
abedex F SR membrane is manufactured from a compound of
distilled bitumen and elastoplastomeric polymers. After mixing, the characteristics of the polymers are dominant and are evenly dispersed throughout the matrix.
abedex F SR membrane has excellent stability at both high and low temperatures and possesses good longevity.
The embossing assists in the rapid burn off of the polyethylene film in the torching operation and allows good vapour diffusion.abedex® HM
abedex HM membrane, combines ease of application, thermal fusibility and the flexibility at low temperatures -25°C, strength and BPE elastomeric compound.
Furthermore, the compound has excellent qualities of adhesion and of compatibility with other oxidised and modified bitumen and it guarantees a long lasting and strong joint with a resistance to peeling which increases in time, from 2 to 3 times higher than normal bitumen
based or polymer modified membranes.abedex® unigum 4mm
Twin carrier, smooth surface, hard compound strength
abedex unigum Dual Reinforced is a robust and stable membrane due to the incorporation of two reinforcement materials; the membrane strength from the polyester and the stability from the fiberglass matabedex® unigum mineral slate
Twin carrier, low maintenance, mineral surface
abedex unigum Mineral Slate incorporates a slate granule
imbedded into the upper surface of the membrane producing an aesthetically pleasing, low maintenance waterproofing material. It should be noted that this membrane should not be used as a primary waterproofing membrane, but rather as a capping sheet in a two layer system.abe® torch-on 4 mm
The abe® torch-on 4mm membrane manufacturing processes uses polymer modified bitumen reinforced with a composite reinforcement. This ensures a good quality membrane that has high elongation and stability across the defined temperature range. Ideal for use in warmer
climates.
The upper face of abe® torch-on 4 mm are coated with a uniformly distributed, fine serigraphed talc, a patented treatment which allows the membrane to be unrolled easily during the application. The underside of the membrane is lined with Flamina, a sacrificial polyethylene film. It is embossed with small squares which assist in the rapid burn-off of the Flamina indicating the correct melting point for
adhesion to a substrate ensuring a reliable installation.abedex V-SR
Polymer modified bitumen reinforced with a composite reinforcement.
The abedex V-SR membrane are available in 3 mm and
4 mm thicknesses on a 10m roll. The membrane manufacturing processes uses polymer modified bitumen reinforced with a composite reinforcement. This ensures a good quality membrane that has high elongation and stability across the defined temperature range.
Cold applied membranes
malthoid 2 ply
Malthoid 2 ply is an asphaltic waterproofing membrane
with a fibre felt carrier.malthoid 3 ply
Malthoid 3 ply is an asphaltic waterproofing membrane
with a fibre felt carrier.malthoid 5 ply
Malthoid 5 ply is an asphaltic waterproofing membrane
with a fibre felt carrier.duraflex®
duraflex® is a ready to use flexible slurry based on a special synthetic resin dispersion and a blend of selected cements mixed with carefully graded aggregate.
Uses:
• Protection and repair of balconies, terraces and haunching concrete of roads and bridges
• Waterproofing of new and old buildings (internal and external)
• Waterproofing of tanks, containers and water reservoirsabe® peel & stick membrane
abe® peel & stick membrane is a universal, self-adhesive
waterproofing membrane comprising of a unique ethylene
polymer modified bitumen. An exposed spunbond, non-woven, polypropylene fabric has been incorporated in this product rendering the product resistant to alkali solutions and further allows the use of both cementitious and acrylic systems if required without degrading the membrane.
Uses:
• Low thresholds that do not accommodate multi-layer built up systems to receive tiles
• Waterproofing floor areas of patio’s, balconies, wet areas in kitchens, bathrooms and showers to receive tile adhesive and tilingbidim®
Non-woven, continuous filament, needle-punched, polyester geotextile
Uses:
• Drainage behind retaining walls.
• Filtration in subsoil drains.
• Separation of aggregate on driveways, paths and storage
areas.
• Protection of plastic waterproof membranes in garden or
structural applications.
• As a waterproofing membrane when saturated with bitumen.
• Filter under riprap retaining river banks.
• Roof gardens/Atriums.
• Window boxes.
• Drainage pipe.
• Underground waste disposal and soak away.
• Perimeter subsoil drain.
• Stabilization of the sub grade.ecofelt
ecofelt is a 100% polypropylene continuous filament saturation membrane. It has a highly porous three-dimensional fibre structure, manufactured by needle-punching the fibres to form an homogeneous sheet.
It has been proven internationally to be one of the best saturation membranes for improved waterproofing
performance. ecofelt is compatible with cementitious composites due to its excellent alkali resistance.slatex 2000
slatex 2000 is a bituminised roofing felt, faced over half its
width with a heat-laminated layer of aluminium foil.super laykold® waterproofing tape
super laykold® waterproofing tape is a bitumen aluminium self-adhesive waterproofing tape.
Drainage
abe.®drain G
abe.® drain G is a dimpled high density polyethylene
protection and drainage membrane combined with a
polyester geotextile layer which offers great resistance to all chemical agents usually found in soil and groundwater and to mechanical compression.abe.®drain 20
abe.®drain 20 is a dimpled high density polyethylene
(HDPE) membrane with 20mm dimples.abe.®drain
abe.® drain is a dimpled high density polyethylene (HDPE)
protection membrane which offers high resistance to all
chemical agents usually found in soil and groundwater and
to mechanical compression.abe.®drain 20P
abe.®drain 20P is a dimpled high density polyethylene
(HDPE) membrane with 20mm dimples including perforated slots.
Eco waterproofing
abe.® proof PU eco
abe.® proof PU is a flexible liquid applied single-pack water
based polyurethane waterproofing membrane which is fast
drying and has excellent chemical resistance properties.abe.® proof acrylic primer
abe.®proof acrylic primer is used as a primer, sealer and
bonding agent to prepare surfaces prior to the application of
waterproofing membrane and wall coating systems.
Uses:
• Reduce dust and increase abrasion resistance of the substrate.
• Act as a bonding agent to old torched membrane and
acrylic waterproofing.
• Prime and use as a bonding agent on smooth concrete finishes.
• Seal pores on rough porous concrete to eliminate
air bubbles.
• For coating weathered bitumen.abe.® proof acrylic waterproofing
