Cat`s Eye adhesive
JaycoSeal 237
Jaycoseal 237 is a filled epoxy adhesive, formulated to bond road reflectors to concrete and bituminous road
surfaces. The compound has excellent adhesion to both the road surface and the base of the reflector and has very high strength and impact resistance.
Features:
• Bonding of reflectors (cat`s eyes) to road surfaces.
• General grouting applications.
Concrete adhesives
JaycoBond 201
Jaycobond 201 has been specially formulated to provide a structural bond between existing (cured) concrete and fresh (wet) concrete. It is a two component solvent free epoxy compound, modified with a liquid polysulphide.
Features:
• Compressive strength exceeds that of concrete.
• No loss in bond strength if applied to reinforcing steel.
• Supplied in a ready to use kit form.JaycoCrack 216
Jaycocrack 216 is a high quality, low viscosity, solvent free structural epoxy injection resin. It has been specifically designed to fill and seal cracks and cavities in structural concrete components such as beams, columns, decks, foundations and water retaining structures.
Features:
• Low viscosity, penetrates cracks easily.
• Easy to mix and apply.
• Does not get brittle.
• Good adhesion properties.JaycoBond 274
Jaycobond 274 is a solvent free, thixotropic, polyamide cured epoxy adhesive. It has been specifically designed as a general purpose adhesive suitable for bonding most materials or as a grouting medium for fixing steel rods, bolts etc. into concrete, brickwork or stone. The product is non-slump and is suitable for both horizontal and vertical applications.
Features:
• Non-shrink, impact resistant when fully cured.
• No loss in bond strength if used as a grouting medium.
• Supplied in a ready to use kit form.
Contact adhesive
V423
V423 is a general-purpose brush grade contact adhesive. It exhibits good flow and brushability characteristics and is designed to produce immediate bonds upon contact, without clamps or presses.
Features:
• Bonds a wide variety of substrates.
• Resistant to water, mild acids and alkalis.
• Heat resistant.
Cornice adhesive
Pekay M221
Pekay M221 is a waterbased airdrying acrylic latex adhesive and sealant. It is formulated to have adhesion to expanded polystyrene foam, as well as a wide variety of building materials. It has good wet-stick properties, allowing it to be used to permanently fix moulded cornices in place without any additional support.
M221 is suitable for most moulded cornices, but adhesion may vary against dense moulds particularly where release agents have been used, heavy moulds, plaster moulds, and PVC faced substrates. Careful evaluation of adhesive properties is essential.
Features:
• High Flexibility, suitable for use on dry wall panelling.
• Fast setting, good wet adhesion.
• May be overpainted.
• Good adhesion to a wide variety of substrates without priming.
• Suitable for spatula or gun application.
• Elongation factor of 20 - 25%.
• Economic to use.
• Mildew resistant.
Wood floor adhesive
Pekaset GB690 PU Flooring Adhesive
Pekaset GB 690 is a single component, low VOC polyurethane-based adhesive exhibiting high tensile strength and adhesive properties. It is a permanently elastic product with good gap-filling properties. It is ideally suited for bonding of engineered and solid woods to concrete floors.
Features
• Suitable for all types of wood floors, engineered woods and parquets
• Fast cure system, floors can be sanded after 18 - 24 hours
• Excellent gap filling properties
• Easy to apply
• No shrinkage on curing
• Non-flammable
• Heat resistant to 120°C
• Excellent sound deadening
• Permanently elastic
