primer
AcrySeal
Water-based styrene acrylic co-polymer for sealing masonry substrates (Cement plaster) with excellent binding power and water resistance.
Features:
AcrySeal Acrylic Sealer has been formulated to be alkaline resistant for application on under bound (poor cement ratio) plaster. It will penetrate the plaster and help bind and seal it in order to form a sound surface on which to paint.
Areas of use:
• Sealer for friable plaster
• Sealer for restoring deteriorating paint films
• Sealer for cement roof tiles
• Primer
specialist coat
AcryLatex
AcryLatex is a modified Acrylic latex product that is specially formulated for incorporation into cement compounds. It is used to wet sand and cement mixtures instead of water for waterproofing and damp proofing, improving flexibility, adhesion and the durability of plaster.
AcryLatex can also be used to repair large areas of damaged cementitious surfaces, e.g. repairing floor screeds and walls. As well as areas where very thin plaster films are required (feather-edging). AcryLatex can be used in the repair or construction of fishponds and in plaster below damp proof course (stops rising damp in plaster) and suitable for use in flower boxes, on bridges and buildings.
Features - AcryLatex imparts the following properties to the mixture:
• It makes the dry product water resistant
• The cement becomes flexible
• Allows you to patch damaged floors or walls at depths of 1mm and greater
• Improves both the strength and long-term durability of cement and diminishes dusting
• Improves resistance to certain chemicals
Area of use:
• Damp Proofing
• Waterproofing
• Patching repairsAquaMatt
AquaMatt is a water-based, fibre re-enforced acrylic copolymer coating used for waterproofing masonry decks (flat roofs), parapet walls and any surface where water ponds.
Features:
AquaMatt creates a high quality, fibre re-enforced acrylic waterproofing compound which:
• Reduces the temperature underneath the surface it is applied to by as much as 30%.
• Has been designed to stretch and is water and water-vapour resistant.
• Is recommended for the use of long-term protection. (Maintenance coats applied)
• Can handle ponding.
For best heat reduction, AquaMatt must be over-coated with Paintcor White Elegance or AquaSeal.
Areas of use:
• Flat deck roofs
• Roof Bolt Patches
• Over laps
• Parapet walls
• Window sills
• Water Proofing any flat surface where water may liePlasterBond
PlasterBond is a specially formulated latex which has been developed to promote the adhesion between new plaster and the surface to which the plaster is being applied.
Features:
• PlasterBond is Alkali-resistant
• Good binding power
Areas of use:
• Incorporation into cement mixtures
• As a key coat for new plaster work
topcoat
AquaSeal
AquaSeal is a seamless, acrylic waterproofing system incorporating a Geo-Fabric non-woven membrane. The system has been designed to provide a highly durable, elastic and attractive system which can be used on varying substrates. AquaSeal is a minimum four coat application.
Features:
• Waterproof
• Can take ponding water
• Good U.V. resistance
• Excellent Flexibility
• Available in a standard range of colours
• Supplied in Saturator and top coat (keeps costing reasonable)
Areas of use:
• Flat deck roofs
• Roof Bolt Patches
• Over laps
• Parapet walls
• Window sills
• Water Proofing any flat surfaceElegance Silk
Elegance Silk is a high quality, enviro-friendly exterior wall coating, designed and formulated (to Grade 1 specifications) using quality raw materials to combat South-Africa?s extreme climatic conditions. It is also user-friendly (almost zero spatter, low odour and easy to apply). Elegance Silk has an elegant, silk finish.
Features:
• Resistance to UV (Sun) passes 1 500-hour SABS Test
• Excellent Flexibility
• Stain resistant. Now will resist even hydrocarbon staining.
• Mould resistance
• Low Odour
• Covers hairline cracks
• Waterproofs vertical surfaces
• Elegance washes easily (dust removed simply by rinsing with a hose pipe).
• Almost zero roller spatter on application.
Available in any colour.
• Elegance Silk can be used over Paintcor AquaMatt or AquaSeal waterproofing systems as a maintenance coat to extend guarantee periods and will allow for a wider choice of colours.
• Adhesion promoted
Areas of use:
• Interior and Exterior Walls
• Flat Deck Roofs
• Kitchens and BathroomsRuvAcryl Premium
RuvAcryl Premium has been designed to withstand South-African climate conditions by using the latest weather barrier technology for application onto all roofing types. RuvAcryl roof paint will maintain its colour and protect your roof against UV, acid rain, mould and algae for up to 10 years. RuvAcryl can be used on many different surfaces such as old enamel, glass and certain plastics. RuvAcryl conforms to EU 2010 VOC rules and contains no added lead.
Features:
• Excellent water resistance.
• Excellent UV resistance
• Available in a range of standard colours.
• Can be applied as an interior or exterior wall coating.
• Resistant against alkali. -It can be used as the first and final coat on new, good quality plaster.
• Can be applied to a variety of surfaces.
• Makes use of weather barrier technology.
• Resistant against Acid rain.
Areas of use:
• Pitched tile and steel roofs
• Flat deck roofs with Acrylic waterproofing
• Palisade fencing
• Walls interior and exterior
• Paving
