CHRYSO® Cim 40

CHRYSO® Cim 40 is an aqueous dispersion of fine copolymer particles such as butadiene and styrene. CHRYSO® Cim 40 is very stable in an alkaline environment and perfectly compatible with hydraulic cements.
Uses:
• Primer coats for renderings and toppings. Cement rendering sand mixed type renderings. Base coat, waterproofing coat for plaster & floor finishes. Cement toppings not manually compacted.
• Toppings containing special aggregates and cement (designed to resist wear and tear, dust proofed).
• Mortars used to finish and re-profile corners and external trim. Bonding mortars for construction joints
• Jointing mortars for masonry. Also used to glue traffic islands and sidewalk curbing to concrete or asphalt. Jointing and caulking mortars for masonry joints, chimney stacks, mortar fillets etc.
• Primer for floor repairs & self leveling screens. Additive for cement grouts used to waterproof surfaces. Primer for render coats applied to Lanko Hydroflex. General Mortar and screed cohesion enhancer.
• CHRYSO®Cim 40 increase mortar plasticity, cohesion and adherence. Furthermore, it improves tensile strength, abrasion resistance and impact strength. As this product is not affected by hydrolysis, it is ideal for surfaces in contact (permanent or occasional) with water including salt water.
• It decreases the modulus of elasticity, eliminates hair cracking and reduces shrinkage and dust, accumulation. It improves mortar water-tightness and resistance tool, grease, fuel oil and weak acids. Mortars containing CHRYSO®Cim 40 are non-toxic and may be placed in contact with food products and drinking water.

•  CHRYSO® Cim 40 Datasheet

CHRYSO® Conseal

CHRYSOR Conseal is a concrete surface hardener that reacts with the free calcium in concrete to form insoluble calcium silicate within the pores of the concrete.
Advantages:
• Reduces dusting.
• Improves impermeability.
• Create a harder, denser concrete surface.
• Treated concrete resists the penetration of water.

•  CHRYSO® Conseal Datasheet

CHRYSO® Cure Acrylic

CHRYSO® Cure Acrylic is a water-based slightly viscous acrylic emulsion solution which dries to a colourless stain free surface when applied to concrete.
Advantages:
• CHRYSO® Cure Acrylic is compatible for water retaining structures (potable water).
• Economical, single application reduces incidence of shrinkage cracks.
• Promotes better strength gain characteristics.
• Useful as a dust-proofer and surface hardener (particularly on floor areas).
• No film breakdown period involved.
• Does not interfere with subsequent concrete surface treatments (paints, emulsions, sealants adhesive, renders, tile adhesives etc.).

•  CHRYSO® Cure Acrylic Datasheet

CHRYSO® Cure HPE

CHRYSO® Cure HPE is a ready-to-use water-based curing agent for application on fresh concrete, mortars, other cement based coatings and on recently demoulded concrete.
CHRYSO® Cure HPE forms a protective film when drying, which prevents concrete and mortar from dessiccation. This enables a more complete hydration of the cement particles and limits early age cracking and drying shrinkage. After setting, the surface of the concrete thus treated, offers a better resistance to abrasion. A surface treated with CHRYSO® Cure HPE is initially white in order to easily identify the coated areas. After drying, the coating is
colorless. CHRYSO® Cure HPE eases trowel finishing and
improves the surface finish.
Applications:
• Protection of elements with a high surface / volume ratio: concrete slabs, roads, concrete highway.
• Protection of concrete and mortar subject to adverse drying effects at early age (high ambient temperature, wind).
• Trowel finishing.
• All cement based elements subject to unacceptable dessiccation.
• Precast walling.

•  CHRYSO® Cure HPE Datasheet

CHRYSO® Cure WB

CHRYSO® Cure WB is a low viscosity white pigmented wax emulsion. The formulation of CHRYSO® Cure ensures that the emulsion breaks down to form a non-penetrating continuous film immediately upon contact with cementitious surface.
• This film prevents excessive water evaporation which permits more efficient cement hydration.
• CHRYSO® Cure WB provides a spray or brush applied temporary membrane to retain moisture in concretefor effective curing.
Advantages:
• CHRYSO® Cure WB is compatible for water retaining structures (potable water).
• Reduces incidence of shrinkage cracks.
• Reduces labour costs (no need for wet hessian, etc.)
• Prevents excessive water evaporation, which permitsmore efficient cement hydration.
• Increases the durability of the concrete.
• Promotes better strength gain characteristics.
• Easy to use (spray applied).

•  CHRYSO® Cure WB Datasheet

CHRYSO® CWA 10

CHRYSO® CWA 10 is a crystalline waterproofing
admixture in a dry powder form that is added to the concrete mix at the time of batching. Active ingredients of CHRYSO® CWA 10 react with moisture to form crystals deep within the pores and capillary tract of the concrete structure. CHRYSO® CWA 10 can transform an entire concrete structure into an impermeable water barrier with lasting integral waterproofing properties. Used to waterproof both the interior and exterior of building, CHRYSO® CWA 10 prevents concrete decay and protects against moisture transmission, chemical attack and corrosion of reinforcing steel.
Advantages:
• CHRYSO® CWA 10 can be used for positive and negative waterproofing of a structure.
• The product is ideal for concrete exposed to harsh conditions and enhances the durable properties of concrete as it protects the concrete from waterborne soluble salts
• Gives concrete crack sealing characteristics, it can seal hairline crack up to 0.4 mm wide
• CHRYSO® CWA 10 is a permanent, non toxic product that is highly resistant to aggressive chemicals.
• An integral waterproofing system that is a permanent solution.
• The product can be added to concrete at the time of batching and is therefore not subject to climatic restraints.
• Process friendly and increases flexibility in construction scheduling.

•  CHRYSO® CWA 10 Datasheet

CHRYSO® Fuge B

CHRYSO® Fuge B renders mortar and concrete highly resistant to capillary action and reduces, or even eliminates, infiltration of water under pressure. The fine particles contained in CHRYSO® Fuge B combines with the lime in cement to form water repellent particles. These obstruct the capillary action within concrete and prevent water from penetrating. CHRYSO® Fuge B does not significantly modify the characteristics of fresh concrete and mortar, nor the compressive strength.
Use:
• All types of cements.
• Concrete for foundations under the water table.
• Concrete for reservoirs, tanks, etc.
• Sealing grout for tanks.
• Concrete and mortar in regular contact with water.

•  CHRYSO® Fuge B Datasheet

CHRYSO® NS Grout Additive

A non-shrink powder additive for cementitious grouts and concrete, CHRYSO®NS Grout Additive is a combination between a plasticising agent and a gas producing expansion medium.
Advantages:
• Durability: The plasticising agent allows for the use of a low water/cement ratio with subsequent high strengths and durability. It ensures low permeability and increased
density.
• Shrinkage compensation: The gas expansion medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion with a high degree of interfacial contact.
• The controlled positive expansion in unset grouts incorporating CHRYSORNS Grout Additive overcomes plastic settlement when measured in accordance with ASTM C827. An unrestrained expansion of 1%- 4% is typical.
• Fluidity: Gives high grout fluidity with a low water/cement ratio, for ease of placement or injection.
• Iron-free and chloride free: No metallic content to corrode and cause staining or deterioration due to rust expansion in the grout.
• Can improve compressive strengths by ±15% when cured under restraint.
• Does not significantly affect the setting times of cement based grouts.

•  CHRYSO® NS Grout Additive Datasheet

CHRYSO® Dust Primer

CHRYSO® Dust Primer is a co-product of cellulose production that aids as a binding additive in the coalescing, stabilisation and suppression of rising dust particles and spores, used with CHRYSO® Eco Dust 200.
Advantages:
• Water soluble & biodegradable.
• Easy application and safe to use.
• Helps with compliance to safety, environmental, health and occupational regulations.
• Less fuel usage & virtually no tyre traction.
• UV resistant.
• VOC free.
• Reduced water usage and man hours.
• High rainfall tolerance.

•  CHRYSO® Dust Primer Datasheet

CHRYSO® Eco Dust 100

CHRYSO® Eco Dust 100 is a fine particle size surface poly-adhesive that exhibits excellent dust binding and prolonged water resistance properties.
Advantages:
• Water soluble & biodegradable.
• Easy application and safe to use.
• Helps with compliance to safety, environmental, health and occupational regulations.
• Less fuel usage & virtually no tyre traction.
• UV resistant.
• VOC free.
• Reduced water usage and man hours.
• High rainfall tolerance.

•  CHRYSO® Eco Dust 100 Datasheet

CHRYSO® Eco Dust 200

CHRYSO® Eco Dust 200 is an emulsified dust lubrication system that aids in the coalescing, stabilisation and suppression of rising dust particles and spores, preventing them from becoming air-borne.
Advantages:
• Water soluble & biodegradable.
• Easy application and safe to use.
• Helps with compliance to safety, environmental, health and occupational regulations.
• Less fuel usage & virtually no tyre traction.
• UV resistant.
• VOC free.
• Reduced water usage and man hours.
• High rainfall tolerance.

•  CHRYSO® Eco Dust 200 Datasheet

CHRYSO® Eco Dust 200D

CHRYSO® Eco Dust 200D is an emulsified dust lubrication system that aids in the coalescing, stabilisation and suppression of rising dust particles and spores, preventing them from becoming air-borne.
Advantages:
• Water soluble & biodegradable
• Easy application and safe to use
• Helps with compliance to safety, environmental, health and occupational regulations
• Less fuel usage & virtually no tyre traction
• UV resistant
• VOC free
• Reduced water usage and man hours
• High rainfall tolerance

•  CHRYSO® Eco Dust 200D Datasheet

CHRYSO® Eco Dust Oil

CHRYSO® Eco Dust Oil is an emulsified surface lubricant that coalesces particles to form a dust suppressing film.
Advantages:
• Water soluble & biodegradable.
• Easy application and safe to use.
• Helps with compliance to safety, environmental, health and occupational regulations.
• Less fuel usage & virtually no tyre traction.
• UV resistant.
• VOC free.
• Reduced water usage and man hours.
• High rainfall tolerance.

•  CHRYSO® Eco Dust Oil Datasheet

CHRYSO® Crackstop F

CHRYSO® Crackstop F range of fibrillated polypropylene fibres, reduce the occurrence of plastic shrinkage cracking and plastic settlement, whilst enhancing the surface properties and the durability of the hardened cementitious product.
• CHRYSO® Crackstop F is cut to lengths of 3, 6, 12 or 18mm and have a nominal thickness of 50 microns.
• CHRYSO® Crackstop F is coated with surfactant to improve dispersion and bond.
Advantages:
Special surfactant coatings enable excellent dispersion of individual filaments, allowing the formation of homogeneous three-dimensional matrix within the concrete mix. The inclusion of ADFIL Construction fibres provides significant technical benefits in both the plastic and hardened state of concrete.
• Reduced plastic shrinkage cracking.
• Alternative to crack control mesh.
• Reduced plastic settlement cracking.
• Increased abrasion properties.
• Reduced bleeding.
• Increased impact resistance.

•  CHRYSO® Crackstop F Datasheet

CHRYSO® Easyfinish

CHRYSO® Easyfinish is shaped to create a smooth concrete surface finish and designed for concrete reinforcement
CHRYSO® Easyfinish is engineered to replace steel mesh or steel fibres in precast and sprayed concrete, ground supported internal slabs and external hard standings.
CHRYSO® Easyfinish revolutionises concrete reinforcement in concrete mixes with low sand content.
Advantages:
• Smooth concrete surface finish.
• Concrete reinforcement.
• Maximum bond within concrete.
• Easy to transport, store and handle.
• Improved safety on site.
• Increased speed of construction.
• Greater tensile strength per fibre.
• Creates enhanced residual flexural strength and
toughness in the concrete.

•  CHRYSO® Easyfinish Datasheet

CHRYSO® Fibrin XT

CHRYSO® Fibrin XT is a monofilament polypropylene fibre that reduces the occurrence of plastic shrinkage and plastic settlement cracking, whilst enhancing the surface properties and durability of hardened cementitious products.
The fibres are coated with surfactant to improve initial dispersion. Fibrin XT fibres are extremely fine and although slightly visible at the plastic stage, are not readily seen on the hardened surface.
Advantages:
• Reduced plastic settlement and shrinkage cracking.
• Reduced bleeding.
• Reduced water and chemical permeability.
• Improved freeze / thaw resistance.
• Increased abrasion resistance.
• Increased impact resistance.
• Alternative to crack control mesh with the appropriate design.

•  CHRYSO® Fibrin XT Datasheet

CHRYSO® Fibrin XT (6mm/12mm)

•  CHRYSO® Fibrin XT (6mm/12mm) Datasheet

CHRYSO® NS Grout Additive

A non-shrink powder additive for cementitious grouts and concrete, CHRYSO®NS Grout Additive is a combination between a plasticising agent and a gas producing expansion medium.
Advantages:
• Durability: The plasticising agent allows for the use of a low water/cement ratio with subsequent high strengths and durability. It ensures low permeability and increased
density.
• Shrinkage compensation: The gas expansion medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion with a high degree of interfacial contact.
• The controlled positive expansion in unset grouts incorporating CHRYSORNS Grout Additive overcomes plastic settlement when measured in accordance with ASTM C827. An unrestrained expansion of 1%- 4% is typical.
• Fluidity: Gives high grout fluidity with a low water/cement ratio, for ease of placement or injection.
• Iron-free and chloride free: No metallic content to corrode and cause staining or deterioration due to rust expansion in the grout.
• Can improve compressive strengths by ±15% when cured under restraint.
• Does not significantly affect the setting times of cement based grouts.

•  CHRYSO® NS Grout Additive Datasheet

CHRYSO® Fuge B

CHRYSO® Fuge B renders mortar and concrete highly resistant to capillary action and reduces, or even eliminates, infiltration of water under pressure. The fine particles contained in CHRYSO® Fuge B combines with the lime in cement to form water repellent particles. These obstruct the capillary action within concrete and prevent water from penetrating. CHRYSO® Fuge B does not significantly modify the characteristics of fresh concrete and mortar, nor the compressive strength.
Use:
• All types of cements.
• Concrete for foundations under the water table.
• Concrete for reservoirs, tanks, etc.
• Sealing grout for tanks.
• Concrete and mortar in regular contact with water.

•  CHRYSO® Fuge B Datasheet

CHRYSO® Acid Wash

CHRYSO® Acid Wash is a liquid inhibited- acid that is designed for removing rust and concrete from metal surfaces.
Advantages:
• Remains stable even at elevated temperatures.
• The longer active life means greater dissolving of concrete.
• Free rinsing, as CHRYSO® Acid Wash does not plate out on clean metal surfaces.
CHRYSO® Acid Wash can be used to clean:
• Steel or plastic moulds.
• Readymix concrete vehicles.
• Mixer drums.
• Concrete pumps.
• Cement silos.
• Cement scales.

•  CHRYSO® Acid Wash Datasheet

CHRYSO® Care Protec

CHRYSO® Care Protec leaves a greasy film on the
surface of any metallic part, which prevents the hydraulic binders from naturally sticking, thus allowing easier cleaning and effective protection from rust.
The non oxidising agents contained in CHRYSO® Care Protec don’t modify painted steel sheets colours. The concrete doesn’t stick to the mixer’s arms, which eases cleaning.

•  CHRYSO® Care Protec Datasheet

CHRYSO® Concrete Stripper

CHRYSO® Concrete Stripper can be used anywhere you find concrete, cement or mortar. It destroys the binder of these materials, making them easy to remove from surfaces by brushing them off.
Advantages:
• Formulated from mostly eco-friendly and VOC free etching materials.
• It can be used without damaging the surfaces where cement and concrete is found: coated steel, paints, wiring, plastic, aluminium, chrome, copper, glass.
• It can be left overnight to loosen up the heaviest concrete build up.
• It assists in removing efflorescence from concrete.
• It can be used to clean steel or plastic moulds.
• It can be used to clean severe build up of concrete and cement prior to surface treatments (concrete sealers).
CHRYSO® Concrete Stripper can be used to clean:
• Steel or plastic moulds.
• Readymix concrete vehicles.
• Mixer drums.
• Concrete pumps.
• Cement silos.
• Cement scales.

•  CHRYSO® Concrete Stripper Datasheet

CHRYSO® CWA 10

CHRYSO® CWA 10 is a crystalline waterproofing
admixture in a dry powder form that is added to the concrete mix at the time of batching. Active ingredients of CHRYSO® CWA 10 react with moisture to form crystals deep within the pores and capillary tract of the concrete structure. CHRYSO® CWA 10 can transform an entire concrete structure into an impermeable water barrier with lasting integral waterproofing properties. Used to waterproof both the interior and exterior of building, CHRYSO® CWA 10 prevents concrete decay and protects against moisture transmission, chemical attack and corrosion of reinforcing steel.
Advantages:
• CHRYSO® CWA 10 can be used for positive and negative waterproofing of a structure.
• The product is ideal for concrete exposed to harsh conditions and enhances the durable properties of concrete as it protects the concrete from waterborne soluble salts
• Gives concrete crack sealing characteristics, it can seal hairline crack up to 0.4 mm wide
• CHRYSO® CWA 10 is a permanent, non toxic product that is highly resistant to aggressive chemicals.
• An integral waterproofing system that is a permanent solution.
• The product can be added to concrete at the time of batching and is therefore not subject to climatic restraints.
• Process friendly and increases flexibility in construction scheduling.

•  CHRYSO® CWA 10 Datasheet

CHRYSO® Deco Lav N

CHRYSO® Deco Lav N is a range of 10 in-form solvent-based retarders.
CHRYSO® Deco Lav N enables to delay the hydration of cement on the concrete surface in contact with the mould. The final cleaning of the concrete thus treated makes the aggregates apparent.

•  CHRYSO® Deco Lav N Datasheet

CHRYSO® Deco Lav P

CHRYSO®Deco Lav P is a range of 8 “positive” aqueous surface retarders. The product is operator and environmentally friendly.
CHRYSO®Deco Lav P enables to delay the hydration of cement on the exposed surfaces of concrete. After cleaning the treated surface, the aggregate in the concrete is exposed. No solvents are used in the formulation of
CHRYSO®Deco Lav P, making it easier to use: it is not necessary to protect any surrounding area, except for painted façades and porous surfaces. The spraying equipment can be rinsed with water.

•  CHRYSO® Deco Lav P Datasheet

CHRYSO® Deco Wash Pico

CHRYSO® Deco Wash Pico is a surface retarder that can be
sprayed to lightly retard concrete surface setting. The finished look obtained has a "sanded" or "acid washed" aspect. CHRYSO® Deco Wash Pico provides a qualitative and consistent finish.
CHRYSO® Deco Wash Pico is film-forming, thus resistant to fine rains and high temperatures during application. It gives the concrete a curing effect that conforms to French standards. The finish is homogeneous and of high aesthetic quality.
Advantages:
• A homogeneous and constant finished aspect.
• CHRYSO® Deco Wash Pico meets curing standard (NF
P 18-371 and NF P 18-370). It also complies with NF
EN 13-877 standards related to concrete pavements.
• Can be used in hot weather conditions.
• Easy to apply.
• Low consumption per square meter.
• Water based formulation.

•  CHRYSO® Deco Wash Pico Datasheet

CHRYSO® Finisol Brut

CHRYSO® FiniSol Brut is a water-based concrete sealer designed to protect aesthetic concrete, especially on concrete at early ages (12 to 24 hours after concrete casting). This product is particularly adapted to protect exposed aggregate concrete, on which it can be applied
immediately after the wash out of the surface retarder.

•  CHRYSO® Finisol Brut Datasheet

CHRYSO® Fuge B

CHRYSO® Fuge B renders mortar and concrete highly resistant to capillary action and reduces, or even eliminates, infiltration of water under pressure. The fine particles contained in CHRYSO® Fuge B combines with the lime in cement to form water repellent particles. These obstruct the capillary action within concrete and prevent water from penetrating. CHRYSO® Fuge B does not significantly modify the characteristics of fresh concrete and mortar, nor the compressive strength.
Use:
• All types of cements.
• Concrete for foundations under the water table.
• Concrete for reservoirs, tanks, etc.
• Sealing grout for tanks.
• Concrete and mortar in regular contact with water.

•  CHRYSO® Fuge B Datasheet

CHRYSO® Dem Oleo RL

CHRYSO® Dem Oleo RL is a hydrocarbon oil based delayed release agent for most types of formwork excluding metal and wood - for decorative concrete.
Advantages:
• Specially formulated for decorative concrete.
• Easy formwork release.
• Ready to use ¡V no additions or dilution required.
• Solvent free and is therefore suitable for rubber, latex, polyurethane, polystyrene and fibreglass formwork.
• Reduces the likelihood of imperfections and surface damage (particularly blow holes) to the concrete, creating more durable, blemish free and consistent concrete surfaces.
• Does not affect the adhesion of subsequent finishes and coatings. Plaster, paint and other coatings may be applied subsequently.
• Does not stain or affect the colour of the concrete, when applied correctly.
• Does not modify cement hydration when applied correctly.
• Water repellent and not affected by rain.
• VOC free ¡V contains no solvents.

•  CHRYSO® Dem Oleo RL Datasheet

CHRYSO® Dem Oleo SM

CHRYSO® Dem Oleo SM is a hydrocarbon oil based delayed release agent for metallic and wooden formwork for wet precast.
Advantages:
• Universal releasing oil.
• Easy formwork release - temporarily protects and extends the life of formwork from corrosion.
• Ready to use - no additions or dilution required.
• Reduces the likelihood of imperfections and surface damage (particularly blow holes) to the concrete, creating more durable, blemish free and consistent concrete surfaces.
• Does not affect the adhesion of subsequent finishes and coatings. Plaster, paint and other coatings may be applied subsequently.
• Suitable for steam curing ¡V does not break down when exposed to high temperatures.
• Does not modify cement hydration when applied correctly.
• Water repellent and not affected by rain.

•  CHRYSO® Dem Oleo SM Datasheet