Anti-Static Flooring
Flowshield ESD
FLOWSHIELD ESD :
- Anti static self levelling.
- A four component, easy to apply, solvent free resin based floor topping laid at 2 mm.
- It is specially formulated as part of an electrostatic dissipatative flooring system.
USES:
To provide a hard wearing, seamless, antistatic floor with an electrical resistance in the range 5 x 104 - 108 ohms.
BENEFITS:
- Meets BS 2050 antistatic requirements.
- Seamless & hygienic finish, no crevices where dirt and
bacteria can dwell.
- Excellent chemical resistance to Sugars & acids.
- Easy to clean & sterilize, low Maintenance requirement.
- Attractive, light reflectant appearance.
- High abrasion resistance
- Solvent free; low odour.
- Fast installation.
Coating Systems
Ivory 304
IVORY 304:
Epoxy enamel
A high gloss epoxy enamel with good chemical resistance
and durability.
ADVANTAGES:
- Easy to clean, bacteria resistant.
- Attractive colours.
- Good chemical and weather resistance.
- Good adhesion to most substrates.
- Long pot life.
- Good mar resistance.Flowcoat SF41
FLOWCOAT SF41:
High performance, solvent free, chemical resistant, high build epoxy resin coating.
USES:
Flowcoat SF41 may be used as a hard wearing coloured floor coating in areas such as factories, warehouses, plant and storerooms where high resistance against chemical attack is required.
BENEFITS:
- Chemical resistant
- Hard wearing
- Abrasion resistant
- Solvent free, low odour
- Aesthetically attractive - brightens up dull factories and warehouses
- Seamless and hygienic finish
- Low maintenance
- Slip resistant finish can be tailored to specific client requirements
- Nonylphenol freeFlowcoat SF41 Stipple
FLOWCOAT SF41 STIPPLE:
A chemical resistant solvent free high build epoxy stipple coating suitable for walls or floors.
USES:
Durable floor or wall coating in process factories, change
houses, prisons, kitchen walls, police stations, mortuaries
and hospitals.
ADVANTAGES:
- Better wear and scuff resistance than smooth surface
finishes.
- Easy to clean and bacteria resistant.
- Non staining and resistant to all industrial cleaning
chemicals.
- Good acid and alkali resistance.
- Resistant to spillages of most industrial solvents
including ethanol, methanol, Xylene, mineral turpentine,
lacquer thinners, Xylene and petrol.
- Improves aesthetics of uneven plaster or floor finishes.
- Less slippery than smooth finish flooring.
- Solvent free.Flowcoat UV
FLOWCOAT UV:
A two pack polyurethane sealer, providing excellent UV protection available in clear or various colours.
USES:
- As a UV stable, coloured finish coat in the Deckshield membrane and intermediate system.
- The Deckshield system can be applied over concrete, screeds or asphalt to provide a slip resistant wearing surface.
- As a concrete coating with high abrasion &
wear resistance.
BENEFITS:
- Easy to apply
- Light stable-does not yellow
- Non slip finish can be tailored to requirements
- High abrasion resistance
- Fast installation
- Exceptional mar & scratch resistanceFlowcoat Cascade
FLOWCOAT CASCADE:
Flowcoat Cascade is a tough, protective chemical resistant,
decorative epoxy flooring system incorporating coloured
quartz to combine aesthetic appeal with demanding flooring
requirements.
USES:
- Change Rooms & Ablutions
- Corridors
- Hospitals
- Packing Halls
- Prisons
- Schools
- Showrooms
- Studios
- Veterinary Clinics
- Food Processing, Beverage & Bottling Plants
BENEFITS:
- Colourful attractive range to enhance the working
environment
- Long life expectancy - 7 times thicker than conventional
epoxy and polyurethane floor coatings
- Excellent abrasion and scratch resistance
- Easy to maintain
- Fast track application
Floor Sealers
Flowseal EPW
FLOWSEAL EPW:
Semi gloss water based epoxy coating system with good chemical and wear resistance.
USES:
Flowseal EPW is suitable for use in food process areas, kitchens, light industrial areas, storerooms, garages and areas of pedestrian and ight traffic.
BENEFITS:
- Hygienic and scrub resistant
- Vapour permeable - allows floors to breath
- Can be applied to damp substrates (i.e. green concrete)
- Cost effective
- Easy to apply with roller or spray equipment
- Enhances appearance of working environment
- Solvent free
- Low odourFlowseal EPW Clear
FLOWSEAL EPW CLEAR:
A water dispersed, clear, low viscosity polyamide cured epoxy.
USES:
A primer and penetrating sealer particularly recommended when applying thin film epoxy coatings to dense concrete surfaces.
BENEFITS:
- No odour-water based
- Excellent adhesion
- Damp tolerant-100% (no free standing water)
- Cement compatible and stable
- Long pot life-1hour
Liquid Damp Proof Sealer
Hydraseal DPM
HYDRASEAL DPM:
A two-component, solvent free, epoxy resin, liquid applied surface damp proof membrane.
USES:
Allows immediate installation of moisture sensitive floor finishes onto concrete and screeds which have moisture content up to 99% relative humidity.
BENEFITS:
- Reduces project timescale
- Impervious to water
- Excellent adhesion to concrete and screeds
- Tolerates up to 99% relative humidity in the concrete or screed substrate
- Easy to apply
- Contrasting colour coats allow visual control of Hydraseal membrane uniformity in laying
- Solvent free, low odour
- Low odour
Screeds
Flowtex HT
FLOWTEX HT:
Flowtex HT is a hard wearing, epoxy mortar screeding compound.
A solvent free epoxy hand trowelled screed system available in a range of colours. Applied at 6-7mm.
USES:
Ideal for use in heavy duty industrial environments and dry process areas where the floor is subject to heavy traffic, impact and chemical spills.
BENEFITS:
- Quick set strength development to over 70mPa
- Excellent adhesion
- High abrasion and impact resistance
- Very good chemical resistance
- Good resistance to thermal shock
- Excellent mechanical properties
- Can be applied to vertical walls
- Low exotherm allows for applying thick screeds
- Can be supplied in many colours
- Easy to cleanPeran PTS
PERAN PTS :
Peran PTS is a hard-wearing, uni-coloured resin floor topping made up of natural coloured quartz granules power trowelled and then encapsulated in a resin binder. Peran
PTS is available with a chemical resistant sealer coat and can be finished off in a matt or gloss finish.
USES:
Ideal for use in heavy industrial type applications where durability and aesthetics are key factors. Wet and dry process areas where the floor is subject to heavy traffic,
impact and chemical spills.
BENEFITS:
- High scratch resistance
- Easy to clean and maintain
- Excellent wear and impact resistance
- Seamless, hygienic finish
- Abrasion resistant
- Rapid installation
- High chemical resistance
Self Leveling Systems
Flowcem DPM
FLOWCEM DPM:
A 3 component technically advanced epoxy cement self
smoothing composite as a surface damp proof underlayment.
USES:
Allows immediate installation of moisture sensitive floor
finishes (such as epoxy systems, vinyl or wood) onto concrete and cementitious screeds which have a moisture content of up to 99% Relative Humidity or no underlying damp course membrane. Levelling and patching uneven screeds or concrete. Also suitable as a skimming and patching compound.
BENEFITS:
- Excellent adhesion to concrete & screeds.
- Permeable to water vapour
- Tolerates up to 99% relative humidity in the concrete or
screed substrate.
- Reduces undulation on substrate
- Chemically and mechanically compatible with concrete
chemistry forming monolithic structure.
- Easy to apply (self smoothing).
- Low odour.
- Excellent resistance to water and oils.
- High mechanical strengthFlowshield SL 1000
FLOWSHIELD SL 1000:
Hygienic self smoothing resin floor coating applied at a thickness of 1mm.
USES:
Dry process areas where the floor is subjected to medium to heavy duty foot, trolley, pallet truck and rubber wheeled fork lift traffic. Typical uses include laboratories, clean rooms, warehouses, and electronic, aerospace, automotive and printing plants.
BENEFITS:
- Attractive, enhances working environment
- Hygienic - easy to clean
- Non-tainting, non-dusting
- Hard wearing floor finish
- Abrasion resistant
- Anti-static grade available
- Solvent Free - Odourless
- Excellent chemical resistanceFlowshield SL
FLOWSHIELD SL:
Hygienic self smoothing resin floor coating applied at a thickness of 1mm.
USES:
Used in the food and beverage industry, hospitals and mortuaries, pharmaceutical industry, mines and collieries. Recommended for canteens and kitchens, ablutions, bottling and packaging halls, bakery and dairy floors and spinning and weaving halls.Flowshield Quartz
FLOWSHIELD QUARTZ:
Smooth, glossy, self smoothing resin floor finish with a decorative speckled finish. Ideal for a minimalist, modern, contemporary environment.
USES:
Ideal for areas requiring attractive, but hard wearing floors, such as shops, department stores, restaurants, garden centres, garages and airports.
BENEFITS:
- Attractive and colourful floor finish.
- Easy to clean and maintain.
- Hard wearing.
- Environmentally friendly.
- High chemical resistance.Flowtex CR
FLOWTEX CR:
Chemical Resistant Epoxy Mortar Screed
A specialised high performance epoxy mortar screed with excellent resistance to both acid, alkali and most solvents.
USES:
Designed for use in high chemical environments such as acid
and alkali bund areas, food processing factories, battery
charging bays, chemical loading bays and other areas where conventional epoxy systems are unsuitable. Used as a bedding and grouting compound for acid tiles and bricks.
ADVANTAGES:
- Extremely good chemical resistance to concentrated
solutions of both organic & inorganic acids.
- Extremely good mechanical Properties.
- Can be applied to vertical surfaces.
- Can be supplied in basic coloursFlowshield LXP
FLOWSHIELD LXP:
Impact Resistant self-levelling Polyurethane
Flowshield LXP is a modified multi-functional polyurethane
flooring system providing exceptional impact and abrasion
resistance, whilst maintaining good chemical and physical
performance for demanding industrial applications. A two
pack, solvent free, flexible polyurethane topping applied at 1mm.
USES:
- Food & Pharmaceutical industries
- Showroom and workshops
- Freezer Rooms
- Boling Plants
- Meat Processing Factories
- Breweries
BENEFITS:
- Excellent impact resistance
- Excellent abrasion resistance
- Good chemical and physical properties
- 30% Elongation providing crack bridging properties
- Odourless when applied
- Smooth self-levelling finish
- Exceptional adhesion to mat substrates including steel.
- Seamless & hygienic finish, no crevices where dirt and
bacteria can dwell.
- Easy to clean & sterilise, low maintenance requirement.
- Flexible, can be used over Asphalt, wood & steel.
- Solvent free; low odour.
