Adhesives
abeco® mastic
abeco® mastic is a cold laid bituminous mastic consisting of stone chippings, portland cement, sand and a binder, flintkote 3.
USES:
• abeco® mastic has been successfully used in numerous flooring applications and has more than 45 years of service history in the South African market.
ADVANTAGES:
• Produces a jointless, non-dusting, warm, resilient, quiet floor surface which is non-slip, vermin proof, damp proof, nonflammable and self-healing under traffic including the heaviest loads carried on steel, plastic or rubber wheeled vehicles.
• Does not produce disintegration – may be laid over any firm, sound, clean subflooring including concrete, asphalt, well compacted crusher run, steel and timber.
• Laid to a nominal 12 mm dry thickness abe.®co mastic dries to a black colour.duralatex
duralatex is a synthetic resin polymer which is supplied as a ready to use liquid. It is designed to improve the qualities of site-batched cementitious mortars and slurries. Being resistant to hydrolysis, it is ideal for internal and external applications in conjunction with cement.
USES:
• Improving adhesion of thin section cement patches, mortars and screeds to their substrates.
• Improving tensile and fl exural strengths of sand/cement
mixtures thus permitting thinner than usual layers.
ADVANTAGES:
• Single-component liquid can be easily gauged as required.
• Improves cohesion and workability.
• Improves mortars to provide waterproof repairs, renders and toppings that are highly resistant to freeze/ thaw cycling.
• Improves tensile and flexural properties allowing thin
applications.
• Excellent bond to concrete, masonry, stonework, plaster and blockboard.
• Contains no chlorides.
• Can be applied to damp substrates.epidermix® 116
Two component, solvent free epoxy compound.
USES:
• Bonding new (plastic) concrete or screeds to existing
hardened concrete in non-load bearing applications.
• Priming of prepared concrete prior to the application of
abescreed epoxy mortar, abescreed duraTop and
abedur S type cementitious floor screeds, in order to achieve fully bonded systems
ADVANTAGES:
• Adhesion of interfaces of wet/dry concrete, screeds or toppings.flintkote 3 abeco® mastic
Thixotropic water dispersed bitumen emulsion.
USES:
• flintkote 3 abeco® mastic is a general purpose bituminous coating and vapor barrier and flooring system binder. See abe.®co and tank base mastic.
ADVANTAGES:
• Waterproof coating and vapor barrier.
• Easy, cost effective.
• Waterproof binder for mastic flooring which is
easily repairable.
• Suitable for waterproofing membrane (with fabric and UV
protection).
• Potable water containment.
Case Hardening
abe® Conseal
abe®Conseal is a concrete surface hardener that reacts with the free calcium in concrete to form insoluble calcium silicate within the pores of the concrete.
USES:
• Concrete floors and walls.
• Concrete with a sufficient porosity level.
• abe®Conseal l can be beneficially applied to water
retaining structures and underground concrete to reduce
dusting.
ADVANTAGES:
• Reduces dusting.
• Improves impermeability.
• Excellent adhesion and abrasion properties
• Creates a harder, denser concrete surface.
• Treated concrete resists the penetration of water.
Coatings
abecote® 337 tough epoxy paint
abecote® 337 is a two component, solvent free, water dispersed, polyamide cured epoxy.
USES:
• abecote® 337 is a protective, decorative and oil resistant coating for: cementitious, masonry and asphaltic surfaces, floor coatings and an economical primer.abecote® clear PUD
abecote® PUD clear is a two component solvent free water borne polyurethane coating formulated to provide an ultra durable clear coating with a gloss or matt finish.
USES:
• abecote® PUD clear is essentially used as a top coating for sealing/maintenance coat of PU and EP coatings. abecote® PUD clear offers a very good cleaning effect and resistance to car tyre contamination (black heel marking – BHM).
ADVANTAGES:
• Environmentally and user friendly (solvent free).
• Excellent mar resistance.
• Gloss finish.
• Easy cleaning – good stain resistance to coffee,
shoe polish and mustard.
• Long pot life.abecote® tough PU paint (clear)
abecote® tough polyurethane paint is a high quality single component waterborne PU floor paint for interior and exterior concrete surfaces.
USES:
• abecote® tough polyurethane paint is a durable, hardwearing and fashionable coating, for domestic concrete surfaces such as floors, patios and garages including light industrial applications.
ADVANTAGES
• Environmentally and user friendly.
• Easy to use, water based satin finish.
• Easy cleaning – good stain resistance to coffee, shoe polish and mustard.
• Single component – easy, no-mix formula.
• Excellent scratch, scuff and wear resistance.
• Chemical and stain resistant.
• Resists hot tyre pick-up.
• UV and weather resistant – colourfast and non-yellowing.abeseal finisol
abeseal finisol is a water based concrete sealer that is moisture insensitive (tolerant) and dries clear.
USES:
• A seal coat for cementitious screeds, abescreed duraTop and abescreed SLCP.
• abeseal finisol is designed to protect aesthetic concrete,
especially on concrete at early ages (12 to 24 hours after
concrete casting). This product is particularly adapted to
protect exposed aggregate concrete, on which it can be
applied immediately after the wash out of the surface
retarder.
• Decorative concrete, pavers, slabs and street furniture.
• Precast concrete elements.
• Pigmented screed sealing and colour enhancing.
• Can be overcoated with water based systems for demarcation lines.abecote® SF 217
abecote® SF 217 is a two component, solvent free novolac modified epoxy.
USES:
• abecote® SF 217 clear resin system is used for sealing,
laminating, screening and grouting applications. Not suitable for use on galvanised or other zinc coated surfaces.
ADVANTAGES:
• High chemical resistance not possible with standard epoxies
• May be used as a laminating resin
• For high chemical resistance screeding
• For chemical tile grouting
• For sealing porous elements such as concrete and wood.abecote® SF 356
abe.®cote SF 356 is a two-component, solvent-free aminecured epoxy tar.
USES:
• High-build epoxy tar coating for chemical resistance – protection of asphalt road surfaces against oil attack. When mixed with aggregate can be used as a paving compound.
ADVANTAGES:
• High chemical-resistant coating for concrete and steel.
• High-build for longer life.
• Ideal protection for asphalt surfaces.
• Versatile – used as binder for epoxy tar mortar.
• Good wear resistance.
• Easily applied.
• Economical.
Curing
duracure SBC
duracure SBC meet requirements of ASTM C309 specification for liquid membrane-forming compounds for curing concrete..
USES
• Applies easily and quickly by spray, brush or roller for
efficient curing of concrete.
Decorative Solutions
CHRYSO® Béton Ciré Finishing
CHRYSO® Béton Ciré Finishing is a blend of selected dry
powders containing Portland cement, minerals and additives.
USES:
• As a plain, burnished or coloured skim application to walls,
floors and ceilings.
• Columns, stairways, architraves and facades.
• Furniture made of concrete and MDF wood.
• Counter tops.
• Wet rooms, kitchens and bathrooms.
• Decorative or architectural fine finishes.
• Decorative applications in commercial buildings, hotel lobbies and show rooms.
• Can be applied over CHRYSO® Béton Ciré Grip and
CHRYSO® Texture Top.
ADVANTAGES:
• Easy to apply.
• Quick drying, reduced turnaround time.
• Wide range of architectural features.
• Warm earth colours available.
• High bonding properties.
• UV stable.
• Stain resistant subject to sealer selection.
• Excellent compressive and flexural strengths.
• Excellent abrasion properties.
• Can be used for interior and exterior applications.CHRYSO® Béton Ciré Grip
CHRYSO® Béton Ciré Finishing is a blend of selected dry
powders containing Portland cement, minerals and additives.
USES:
• As a plain, burnished or coloured skim application to walls,
floors and ceilings.
• Columns, stairways, architraves and facades.
• Furniture made of concrete and MDF wood.
• Counter tops.
• Wet rooms, kitchens and bathrooms.
• Decorative or architectural fine finishes.
• Decorative applications in commercial buildings, hotel lobbies and show rooms.
• Can be applied over CHRYSO® Béton Ciré Grip and
CHRYSO® Texture Top.
ADVANTAGES:
• Easy to apply.
• Quick drying, reduced turnaround time.
• Wide range of architectural features.
• Warm earth colours available.
• High bonding properties.
• UV stable.
• Stain resistant subject to sealer selection.
• Excellent compressive and flexural strengths.
• Excellent abrasion properties.
• Can be used for interior and exterior applications.
Dry Shakes
abeplate
abeplate is the industry’s premier, iron-armoured,
dry-shake surface hardener for industrial floors needing
additional abrasion resistance and impact protection.
Advanced technology has helped provide methods for the complete integration of the required amount of shake into the floor surface. Therefore, under given job conditions, Heavier applications of this product are now possible.
USES:
• Industrial floor surfaces subject to heavy or frequent
traffic, impact and abrasion.
• Industrial floors needing additional abrasion and impact
resistance at a reasonable installation cost.
• Areas where surface dusting is unacceptable.abecron LA
abecron LA is a non metallic modified level assisting natural aggregate dry shake surface hardener, a ready to use product for hardening concrete floors.
USES:
• Hardening indoor and outdoor concrete surfaces subject to light or moderate traffic.
• Applied over freshly levelled and floated concrete, this dry shake surface hardener provides a low cost solution for hardening new industrial, commercial or residential concrete floors.
• Areas where attractive, more uniform colour is desired
to enhance the appearance of the floor and the working
environment.
• Warehousing and storage areas, automotive maintenance areas and other maintenance facilities.
• Shopping centres, motels, schools, theatres, hospitals, car parks, pavements, driveways and patios.
Primers
abeprime SLC acrylic primer
abeprime SLC acrylic primer is an acrylic emulsion based
primer for abescreed SLC cement based self-levelling screeds.
USES:
• For priming concrete screed sub-floors and impermeable surfaces (tiles and terrazzo) prior to the application of abescreed SLC P self-levelling screeds.
ADVANTAGES:
• Improves adhesion to substrate.
• Reduces surface absorbency.
• Seals the substrate, preventing air bubbles migrating to the surface of the screed.PU/HPU Primer
PU/HPU primer is a three-component, cement modified polyurethane primer specifically designed for use with abe.®screed PU and in combination with abe.®flo HPU. The primer forms a watertight moisture barrier that reduces pin and blow hole formation in subsequent polyurethane applications. The primer is a pore sealerthat provides an
excellent bonding surface.
USES:
• A primer that provides an excellent bond and pore sealer for abe.®screed PU, abe.®flo HPU and abe.®screed PU CG.
ADVANTAGES:
• Excellent chemical resistance.
• Excellent adhesion.
• Effective pore sealing.
• Solvent free.
• Low odour during use.
• High impact, abrasion and thermal shock resistance.
• Antimicrobial silver ion technology.
• Low VOC.
• Moisture barrier.
• Ideal for food processing areas.
Screeds
abecote® SF 217
abecote® SF 217 is a two component, solvent free novolac modified epoxy.
USES:
• abecote® SF 217 clear resin system is used for sealing,
laminating, screening and grouting applications. Not suitable for use on galvanised or other zinc coated surfaces.
ADVANTAGES:
• High chemical resistance not possible with standard epoxies
• May be used as a laminating resin
• For high chemical resistance screeding
• For chemical tile grouting
• For sealing porous elements such as concrete and woodabecote® SF 356
abecote® SF 356 is a two-component, solvent-free aminecured epoxy tar.
USES:
• High-build epoxy tar coating for chemical resistance – protection of asphalt road surfaces against oil attack. When mixed with aggregate can be used as a paving compound.
ADVANTAGES:
• High chemical-resistant coating for concrete and steel.
• High-build for longer life.
• Ideal protection for asphalt surfaces.
• Versatile – used as binder for epoxy tar mortar.
• Good wear resistance.
• Easily applied.
• Economical.abeco® mastic
abeco® mastic is a cold laid bituminous mastic consisting of stone chippings, portland cement, sand and a binder, flintkote 3.
USES:
• abeco® mastic has been successfully used in numerous flooring applications and has more than 45 years of service history in the South African market.
ADVANTAGES:
• Produces a jointless, non-dusting, warm, resilient, quiet floor surface which is non-slip, vermin proof, damp proof, nonflammable and self-healing under traffic including the heaviest loads carried on steel, plastic or rubber wheeled vehicles.
• Does not produce disintegration – may be laid over any firm, sound, clean subflooring including concrete, asphalt, well compacted crusher run, steel and timber.
• Laid to a nominal 12 mm dry thickness abe.®co mastic dries to a black colour.abedur S
abedur S is a blend of very hard, high wearing natural
aggregates, shrinkage compensated cement, free from metallic material, used to produce a hard wearing granolithic type floor.
USES:
• abedur S may be used in surfacing areas operating under very wet or dry conditions and/or subject to extreme wear internally or externally. These screeds can be applied to fine tolerances with respect to line and level.
ADVANTAGES:
• Easily applied, just add water and mix.
• Used for internal and external applications.
• Surface profile finish as required.
• Uniform application thicknesses between 10 mm and 35 mm.
• Dustless (up to 80 % reduction in dust).
• Shrinkage compensated.
• Ultra-high strength and high abrasion properties.
• Light to heavy traffic applications.
• Non-metallic.
• Quick turnaround.abescreed SLCP 25
abescreed SLC P 25 is a single pack, rapid hardening cement based screed for levelling floors where quick setting is essential.
USES:
• For fast track refurbishment and new construction where finishes such as carpets, ceramic tiles, vinyl, wood block or cork need to be applied quickly.
ADVANTAGES:
• Dustless.
• Quick setting.
• Self-levelling.
• Can be pumped up to 2 000 m² per day, under suitable
conditions.
• Walk on after 4 hours @ 25 °C under normal conditions.
• Can normally apply coverings onto a 10 mm thick screed after 24 hours and a 5 mm screed after 12 hours.
• Pumpable or hand laid.
• Single pack just add water.
• Protein free, will not harbour bacteria.abescreed SLCP 15
abescreed SLC P 15 is a single pack, rapid hardening cement based screed for levelling floors where quick setting is essential.
USES:
• For fast track refurbishment and new construction where finishes such as carpets, ceramic tiles, vinyl, wood block or cork need to be applied quickly.
ADVANTAGES:
• Dustless.
• Quick setting.
• Self-levelling.
• Can be pumped up to 2 000 m² per day, under suitable
conditions.
• Walk on after 6 hours @ 25 °C under normal conditions.
• Can normally apply coverings onto a 10 mm thick screed after 24 hours
• Pumpable or hand laid.
• Single pack just add water.
• Protein free, will not harbour bacteria.abescreed SLCP FS
abescreed SLC P FS is a single pack, rapid hardening cement based screed for levelling floors where quick setting is essential.
USES:
• For fast track refurbishment and new construction where finishes such as carpets, ceramic tiles, vinyl, wood block or cork need to be applied quickly.
ADVANTAGES:
• Dustless
• Quick setting.
• Self-levelling.
• Can be pumped up to 2 000 m² per day, under suitable
conditions.
• Walk on after 2 hours @ 25 °C under normal conditions.
• Can normally apply coverings onto a 10 mm thick screed after 24 hours and a 5 mm screed after 12 hours.
• Pumpable or hand laid.
• Single pack just add water.
• Protein free, will not harbour bacteria.abescreed duraTop
abescreed duraTop is a single component, quick hardening, self-smoothing, shrinkage compensated cement based overlay for levelling floors.
USES:
• For fast-track refurbishment and new construction where there is a demand for a smooth surface.
ADVANTAGES:
• Quick drying.
• Self-levelling at 8mm.
• Can be pumped or hand applied.
• Walk on after 24 hours (subject to temperature conditions).
• Normally overcoat after 24 hours at screed thicknesses up to 10mm.
• Single pack, merely add prescribed measure of water.
• Strength and performance controlled fast-track screed system.
• Dustless technology reduces health risks and area
contamination.
• Provides a hard wearing surface.aberep FS
aberep FS is a single component, rapid fix cementitious mortar used to patch holes in concrete floors.
USES:
• aberep FS is particularly useful for smaller patch type repairs to concrete floors offering a minimal amount of downtime. aberep FS can be used to fill holes in concrete floors prior to the application of self-levelling underlayments and/or screeds.
ADVANTAGES
• Ready-to-use, only add clean water.
• Dustless, >80% reduction in dust during handling and mixing.
• The chemical action of the product is specially formulated to be fast acting, permitting completion of patching in hours.
• Chloride free.
• Constant quality/performance (pre-blended).
• Non-toxic.
