Ancillary Products
Ivory 312
IVORY 312:
Road Stud Adhesive
USES:
An epoxy tar adhesive used for fixing “cats-eyes” onto road surfaces, creating rumble strips, bonding concrete kerb stones to asphalt surface and other non structural applications.
ADVANTAGES:
- Good weather resistance.
- Rapid cure
- Convenient mix ratio
- Good chemical resistance
- Resists attack by petroleum products.
- Can cure on damp surfacesIvory 314F Super Fair
IVORY 314F SUPER FAIR:
Epoxy Fairing Compound for Marine Applications
A light weight two-component epoxy compound containing glass micro spheres formulated to provide flexibility and excellent adhesion to steel, G.R.P., wood and Ferro-cement surfaces and to promote ease of sanding.
USES:
A fairing compound for yacht hulls, decks, super structures
and any interior surfaces requiring profiling or smoothing.Ivory 315F
IVORY 315F:
Epoxy Finishing Compound for Marine Applications
A two component epoxy compound containing fine fillers formulated to provide a smooth dense surface capable of being applied at feather thickness.
USES:
As a finishing compound to surfaces faired with Ivory 314F.
To fill small indentations or chips, and smooth rough textures prior to painting.Ivory 318
IVORY 318:
G.P. Liquid Structural Epoxy
General purpose, medium viscosity, clear, structural, liquid epoxy.
USES:
- Rigid concrete crack injection
- Low Viscosity casting or encapsulating compound
- Mixed with aggregate as mortar for re-pointing concrete
spalls and honeycomb, tile grouting, bonding precast
concrete items.
- Laminating with glass fibre.
ADVANTAGES:
- Good mechanical properties giving over 90mPa
compressive strength of mortar.
- Bond strengths greater than concrete
- Easy to mix and apply
- Long pot life
- Non toxic when cured.Ivory 318B
IVORY 318B:
Thixotropic Liquid Epoxy Adhesive & Laminating Resin
A solvent free, adhesion promoted medium viscosity epoxy laminating resin and adhesive for cold moulding. Non-drip thixotropic epoxy for vertical applications.
USES:
Glass fibre sheathing of wooden hulls. An adhesive for cold
moulding of plywood and timber hulls. Construction of glass
reinforced fuel and water tanks.Ivory 319
IVORY 319:
General Purpose Epoxy Adhesive
Trowel consistency adhesive for bonding concrete, wood, steel, fibreglass, cement, glass, ceramic, quarry and mosaic, tiles, bricks and most building materials.
ADVANTAGES:
- Equal volumes
- Easy to mix and apply
- Long pot life
- Can be applied to vertical surfaces
- Gap filling
- Non toxic when cured.Ivory 319 Hi Bond
IVORY 319 HI BOND:
A high performance impact modified epoxy adhesive for applications demanding un-compromised bond with high shear and impact resistance.
USES:
Bonding alumina tiles in demanding applications subject to
impact or high shear.
- Aluminium
- Stainless Steel
- Mild Steel
ADVANTAGES:
- Medium set paste consistency and easy to spread.
- Excellent impact resistance
- Excellent flexibility allowing for difference expansion rates between components.
- Thixotropic for vertical applications.
- Excellent adhesion to mild steel, aluminium, stainless steel, high alumina tiles and all normal building materials.Ivory 319 TAQ
IVORY 319 TAQ:
Quick Set General Purpose Adhesive
Quick set, flexible, trowel consistency adhesive for bonding concrete, steel, alloys, glass ceramic, quarry and mosaic, tiles, bricks and the most common building materials.
ADVANTAGES:
- Quick set.
- Sufficient flexibility to allow for different expansion rates
between most components.
- Excellent adhesion to most surfaces.
- Thixotropic, can be applied to vertical and overhead
surfaces.
- Gap fillingIvory 320
IVORY 320:
Epoxy Thixotropic Adhesive
A two component medium cure, thixotropic epoxy adhesive
with excellent gap filling properties.
ADVANTAGES:
- A general purpose adhesive for most materials
excluding certain plastics and stainless steel.
- Highly recommended in boat building applications in
adhering wood to wood, wood to glass fibre, Formica
and melamine to wood.
- Can be mixed with fillers such as saw dust or silica.AQUAPASTE
AQUAPASTE:
General Purpose Adhesive & Skimming Compound / Skimming Paste
Quick set, flexible, trowel consistency adhesive for bonding
concrete, steel, alloys, glass ceramic, quarry and mosaic
tiles, bricks and the most common building materials.
ADVANTAGES:
- Easy to spread and skim surfaces.
- Quick set.
- Sufficient flexibility to allow for different expansion rates
between most components.
- Excellent adhesion to most surfaces.
- Thixotropic, can be applied to vertical and overhead
surfaces.
- Gap filling without sag.
- Water wipeableIvory Matrix
IVORY MARTIX L.R.:
High Performance Laminating Epoxy
Ivory Matrix L.R. Epoxy is a high performance laminating epoxy designed for applications requiring high physical and mechanical performance. Suitable for “post-cure”
applications.
USES:
- Composite manufacture
- Yacht & boat building
- High performance skies
- Tank liningsFlowflex LM
FLOWFLEX LM:
The Flowflex LM (low modulus) and Flowflex HM (high modulus) joint sealants are high performance gun grade, single component, and moisture cured polyurethane resin based joint sealants for use in industrial floors.
USES:
To strengthen and protect limited movement floor joints and arises from abrasion and attack from traffic and chemicals.
Flowflex LM for use in a wide range of sealing applications in active and cold floor joints.
Note: Maximum joint size is 30mm width. The depth must never be more than 50% of the width.Flowflex HM
FLOWFLEX HM:
The Flowflex LM (low modulus) and Flowflex HM (high modulus) joint sealants are high performance gun grade, single component, and moisture cured polyurethane resin based joint sealants for use in industrial floors.
USES:
To strengthen and protect limited movement floor joints and arises from abrasion and attack from traffic and chemicals.
Flowflex HM for use in cold floor joints or joints where there is limited movement in conjunction with heavy traffic.
Note: Maximum joint size is 30mm width. The depth must never be more than 50% of the width.
primer
Ivory Epoxy Thinners
